User manual MEDION MD 86167 QUICK GUIDE

[. . . ] User Manual USB Flash Drive P89035 (MD 86167) Included with your USB Flash Drive Please check that the contents listed below are supplied with your package. Your package should include the following components: 8 GB USB Flash Drive · Documentation System Requirements Slot: USB port (USB 1. 1/2. 0) · Operating system: Microsoft Windows® XP/Vista®/ Windows®7 Safety Instructions Please read this chapter carefully and observe all listed notes. [. . . ] Before operating the device after a transport, allow it to become acclimatized. High temperature and humidity deviations can lead through condensation to moisture build up, which can cause an electrical short. Fasten down the plug cover before transportation. Electromagnetic Compatibility While connecting the device, the guidelines for electromagnetic compatibility must be followed. Keep at least 1 meter distance from high frequency and magnetic sources of interference (TV, loudspeakers, mobile phones, etc. ), to avoid operation disruption and data loss. Cleaning Instructions Normally cleaning of this device is unnecessary. If necessary, clean the casing with a moist cloth. Recycling Device Packaging At the end of its life, the appliance must not be disposed of in household trash. Enquire about the options for environmentally-friendly disposal To avoid damage during transport, the device is stored in packaging. Packaging is produced mostly from materials which can be disposed of in an environmentally friendly manner and be professionally recycled. Contact your local authority waste department for further information. 12/09 Getting Started Connecting Remove the protective cover of the USB Flash Drive and connect the device with an available USB port. The USB Flash Drive will be recognized and the operating system assigns the letter of an empty drive. Now you can use the device like a diskette drive (copy data, delete, etc. ). Removing USB Flash Drive With some operating systems it may be necessary to sign off the device. Right click with the mouse "Unplug or Eject Hardware" (1) and choose the appropriate entry (2): Safely remove USB mass storage device ­ drive The instruction for device removal will follow: Customer Service Errors and Possible Causes USB Flash Drive is not recognized: Is the device connected correctly? Check in the Windows® device manager, whether the USB units are correctly linked. [. . . ] The names of actual companies and products mentioned herein may be the trademarks of their respective owners. Information in this document is subject to change without notice. 12/09 [. . . ]