User manual MEDION MD 82294 CODE LIST

[. . . ] Trademarks: Applied trademarks are the property of their respective owners. This guarantees reliable operation and a longer life expectancy for your loudspeaker. Keep the operating instructions so that you can pass them on with the loudspeaker if you sell it. The loudspeakers and the transmitter are intended for private use only and are not designed to be used in a heavy industrial business or for commercial purposes. [. . . ] Insert the red and the white cinch plug into the relevant coloured AUDIO IN R and L sockets of the transmitter. Note Devices such as a stereo receiver or a television usually have one red and one white audio output socket. These are usually identified with OUT, AUDIO OUT, LINE OUT or similar. To use these output sockets, you will need a 2 x cinch -> 2 x cinch connection cable (not included; available from specialised trade). Note If the volume decreases after switching off the audio device, set the volume back to a medium volume after connecting the audio device. If the volume at the audio device is too low, there may be disruptions in the transmission between the transmitter and the loudspeaker. Partially pull the connector plug out of the transmitter and then plug it into the headphone output socket of the audio device. Note If you want to attach the connector plug back to the transmitter, then pull it out just a tiny bit so that it is retracted automatically. Switch on your audio device, select a medium loud volume and start the playback. If the power lights light up green, the devices are ready for operation. If the power lights light up blue, the devices are switched on and active. Ready to operate (green power light) Transmitter · ⷠThe audio device was switched off No audio signal for more than 4 minutes because playback is not switched on Loudspeaker does not receive a signal for more than 4 minutes because it is not switched on or there is no radio contact The radio contact to the transmitter was interrupted · Note If radio contact is not established within 5 minutes, the loudspeaker switches off completely. Set the CHANNEL switch of the transmitter to any channel number (1, 2 or 3). Set up the loudspeaker and the transmitter no further apart than 80 m free field. Excessive use of the light has a negative effect on the battery lifetime. Caution Even when operated with batteries, the transmitter must not be submerged in water. However, water can collect beneath the loudspeaker cover and affect the sound. Take the loudspeaker out of the water, turn it around and shake lightly to pour off the water. Note If the loudspeaker does not have radio contact to the transmitter for more than 5 minutes, it will completely switch off automatically. Faults often occur for the simplest of reasons, but some can also be complex and require a lot of analysis. If these tips don't do the trick, then we'll be more than pleased to help you out. Is the audio device switched on, playback started, and have you set a medium loud volume? [. . . ] You will receive further instructions for making your claim under warranty when you call. The service hotline is available on 362 days in the year, including Sundays and bank holidays but excluding Christmas day, New Years Day and Easter day. The service hotline is subject to [national rate] telephone call charges. Special warranty conditions for MEDION PC, notebook, pocket PC (PDA) and navigation devices (PNA) The following terms apply to MEDION PC, notebook, desktop, pocket PC and laptop products and optional items included with such products. [. . . ]