User manual MEDION MD 81664 CODE LIST

[. . . ] REW: DVD: Skip to previous chapter VCR: winds cassette back; faster backwards search during playback 9. FF: DVD: Skip to next chapter VCR: Winds cassette forward; fast forward search during playback PR +/-: Choice of saved TV channels; navigation through DVD menus 13. COPY: Starts the copy function from DVD to VCR or VCR to DVD Connections behind the cover: 15. Mains cable Digital HDMI output: For connecting to an external device with HDMI input AUDIO L-R: Left and right audio outputs EURO AV2/DECODER: Input and output for an external device RF IN (from aerial): connection for a cable connection aerial cable or for an outside aerial RF OUT (to TV): Connection for a TV set with coaxial input COAXIAL: Coaxial audio output for connecting to an amplifier/receiver that is equipped with a Dolby digital or DTS decoder. [. . . ] Using the number keys, enter the desired start time for your recording or change the entry using the up and down arrow keys . Using the number keys, enter the desired finishing time for your recording or change the entry using the up and down arrow keys . P R x : for recording the television programme, provided there is an aerial connection. Select the channel from which you wish to record (P R 1 , P R 2 , P R 3 etc. ); A V 1 , A V 2 : for a device that is connected with the DVD/video recorder via the SCART IN socket; F AV: for a device that is connected to the DVD/video recorder via the front AV connections (yellow, white and red); D V : For a device that is connected to the DVD recorder via the DV IN socket. Using the up or down arrow keys, you can set the recording quality: HQ: high-quality, recording time of approx. Four hours on a DVD SEP: very long play time, recording time of approx. In this case the recorder does not record on a specific date; instead it takes the time settings from the stated recording rhythm. the potential recording settings are as follows: one time , daily , weekly , weekdays (Monday to Friday) and weekends (Saturday and Sunday). If you use a SAT or DVB-T receiver, you must select the channel on these devices (not on the DVD recorder) and ensure that the receiver is switched on at the desired time. If the device is not in standby mode shortly before the recording time, a message appears on the screen. If no blank DVD has been inserted or if there is insufficient storage space on the blank DVD, a message appears on the screen. In order to cancel a recording which has already started, press STOP during recording and switch to DVD mode with the DVD button. Before recording, you may re-edit the programme entry at any time, by opening the Timer menu again. A menu with the following options is displayed: Change: here you can change the recording data; Delete: the programmed recording is deleted; Disabled: the programmed recording is retained in the list but is not executed when the time is reached. All the menu items are selected by the arrow keys and confirmed with ENTER. A submenu opens in which you may select whether just the title selected or all the titles on the disk should be deleted. Confirm your selection with ENTER or press MENU, to cancel the procedure and return to the previous menu. Open the Geschützt option by pressing ENTER and confirm the subsequent question with the field by pressing ENTER. Here it is possible to assign another name to the chosen title, to split the title into two titles, to cut out a particular part or to set an index screen. The "Split recording" and "Delete section" functions cannot be executed with the DVD±R media. Under page a, page A or Icon, you may enable upper or lower case or select special characters. [. . . ] If condensation has formed in the device: give the player one to two hours to dry off. Check whether the batteries need changing and have been inserted correctly. Remove anything which may be blocking the signal between the infrared transmitter, the remote control and the unit's sensor. Is the distance between the remote control and the player too great (over 7m)? [. . . ]