User manual MEDION MD 81877

[. . . ] Si tiene nuevos mensajes oir el mensaje "You've got X new messages" ("X" sustituye aqu a la cantidad de mensajes). Setting Ring tones Ring tones volume Dialling mode System PIN Handset priority Options 5 different ring tones 5 levels and off Pulse dialling/Tone dialling All/One handset Factory setting Melody 1 Level 5 Tone dialling 0000 All Setting Alarm melody Alarm for new messages on answering machine Number of ring tones before the answering machine is switched on. Se tiver novas mensagens ir ouvir "You've got X new messages" ("X" a quantidade). Settings External ring tones Internal ring tones Ring tone volume Receiver volume Key protection Auto-Reply Display Keypad tones Language Options 20 ring tones; 5x normal, 15x polyphonic 20 ring tones; 5x normal, 15x polyphonic 5 levels and off Volume in 5 levels On/Off On/Off 8 level On/Off German/English/Turkish Factory settings Melody 1 Melody 1 Level 5 Volume Level 3 Off Off Level 5 On German Setting Ring tones Ring tone volume Dialling mode System PIN Handset priority Options 5 different ring tones 5 levels and off All/One handset Factory settings Melody 1 Level 5 0000 All Setting Alarm melody Alarm for new messages on answering machine Number of ring tones before the answering machine is switched on. [. . . ] The same number of SMS Centres that were set up at "Send service" will appear now. Use the arrow keys to select the desired sending centre and press the right control key "OK". Choose "Yes" or "No" and confirm with the right control key "OK". Use the answering machine to record incoming messages during your absence or to leave a message for a caller. the answering machine will automatically add the date and time to every message. You must therefore set the date and time in order to use the answering machine properly. If you do not set the date and time, " " will appear on the display of the base station. When the answering machine is switched off, the display will show: , , ", possibly alternating with the number of new messages. When the answering machine is switched on, the display will show the number of stored messages; in the factory settings: "0". To switch off the answering machine with the handset, proceed as follows: Select the "Answering Machine" menu. To switch off the answering machine, select the "Off" option and press the right control key "OK". To switch the answering machine back on, select the "On" option and press the right control key "OK". From there, select the "Settings" option and confirm with "OK". "Ans & Rec": The answering machine will respond to the call and record messages; "Answer only": The answering machine will respond to the call without recording a message. You are now prompted to make your announcement after the acoustic signal. When an announcement has been recorded, this announcement (and not the default one) will be played when there is a call. This is how to play back the answers: In the "Answer Machine" menu, select the "Outgoing msg. You can set the number of ringing signals after which the answering machine is activated. You can choose between 2, 4, 6 and 8 ringing signals and the "ECO Mode". in the "Settings" menu select the "Answer delay" entry. Select the desired number of ringing signals or the economy mode and confirm with "OK". In the economy mode, you can avoid connection fees when playing back your answering machine from outside. [. . . ] Setting Ring tones Ring tone volume Dialling mode System PIN Handset priority Options 5 different ring tones 5 levels and off Pulse dialling/Tone dialling All/One handset Factory setting Melody 1 Level 5 Tone dialling 0000 All Setting Alarm melody Alarm for new messages on answering machine Number of ring tones before the answering machine is switched on. Avoid the use of chemical solutions and cleaning products because these may damage the appliance surface and/or markings. Your DECT telephone has been packaged to protect it against damage in transit. The packaging constituents are raw materials and can be reused or recycled. [. . . ]