User manual MEDION BDA80403ML

[. . . ] During installation please use the car radio's ISO sockets to connect the car radio. The corresponding ISO adapter plugs (car counterparts) can be bought from a dealer depending on the vehicle model. Your guarantee lapses if you disconnect the adapter socket from the cable or cut the cable! First place the right side of the control unit into the frame for installation. [. . . ] Store to memory (AMS) Press the AMS/D-AUD button (21) until you hear a signal tone. The search continues for approximately 5 seconds after locating each station. The number flashing in the display shows the number of the station button to which the appropriate station will be stored. Move through pre-set programs Automatic search of your stations stored in the transmission range. In order to select only the alternative frequencies of the desired regional program; press the AF button (11) a little longer until a signal sounds, in order to switch the mode on or off. You can now search your stations according to the following categories: When the TA mode is switched on and the radio traffic service is being transmitted while the CD or USB is connected, it will switch automatically to radio. If EON cannot find any radio traffic service in another program, it occasionally switches to the EON relay station. the TA function for ongoing radio traffic service is interrupted by pressing the TA/REC button (12). if the TA/REC button (12) is pressed for a longer period , the EON TA LOCAL/EON TA DISTANCE mode will be selected. EON TA information may be assigned with this mode, for example, you are listening to a station that does not provide traffic reports but a traffic report is broadcast on another station frequency, so the unit will automatically switch over for the duration. The unit will switch back to the previous station as soon as this report is completed. EON TA local mode EON TA LO flashes for several seconds on the display when the EON TA LOCAL mode has been selected. EON DX Mode EON TA DX flashes for several seconds on the display when the EON DX mode has been selected. In addition to the familiar music and voice services they also send additional information in the form of encrypted digital signals and these are analysed by the car radio. When a station is received now, the station's name and other information is displayed on the screen (14). Various kinds of RDS services are on offer: PI: PS: AF: Program Identification Code The PI code is used by the radio to identify the station that is being received. Traffic Programme/Traffic Announcement Enhanced Other Network Information If you are listening to a station that does not provide traffic reports and there is a traffic report it is played by switching to another station. Program Type Code The radio can search for stations with pre-set program content, e. Forward and reverse at high speed Press the TUNE |<< (22) or >>| button (23) longer during playback to start fast forward/reverse. Play all titles Press the SCN button (15) and the first 10 seconds of each title are played. Repeat a title Press the RPT button (16) in order to hear the same title continuously. Press the RPT button (16) again and this function will be deactivated. [. . . ] As soon as the external unit is connected, the car radio will search for MP3 or WMA files on the data medium and the message USB will appear on the screen (4). Files on the external data medium and search functions work in the same way as for MP3 CDs. Recording function You can also record data from the radio and the CD player to the external USB data medium with your car radio. You can play the data again by switching to the USB mode with the MOD E button (20) and request individual titles from the USB drive. [. . . ]