User manual MEADE CAPTUREVIEW8X22(CVB1001)

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual MEADE CAPTUREVIEW8X22(CVB1001). We hope that this MEADE CAPTUREVIEW8X22(CVB1001) user guide will be useful to you.


MEADE CAPTUREVIEW8X22(CVB1001) : Download the complete user guide (136 Ko)

Manual abstract: user guide MEADE CAPTUREVIEW8X22(CVB1001)

Detailed instructions for use are in the User's Guide.

[. . . ] Please note that the battery life indicator (lower right) shows black shading top and bottom when receiving full power. Resolution Options Failure to remove batteries will result in lost pictures and dead batteries after several days of CaptureView storage. The batteries will drain even after downloading pictures and deleting them from CaptureView's memory. Please remove the batteries when not using the camera. 3. Sight on a target through CaptureView. Fig. 2: Adjustment of Interpupillary Distance (IPD). 4. Hold CaptureView steady and press the shutter/select button (5, Fig. [. . . ] This warranty applies to the original purchaser only and is non-transferable. Meade products purchased outside North America are not included in this warranty, but are covered under separate warranties issued by Meade International Distributors. RGA Number Required: Prior to the return of any product or part, a Return Goods Authorization (RGA) number must be obtained from Meade by writing, or by calling Meade Customer Service at (800) 62-MEADE. Each returned part or product must include a written statement detailing the nature of the claimed defect, as well as the owner's name, address, and phone number. This warranty is not valid in cases where the product has been abused or mishandled, where unauthorized repairs have been attempted or performed, or where depreciation of the product is due to normal wear-and tear. Meade specifically disclaims special, indirect, or consequential damages or lost profit, which may result from a breach of this warranty. Any implied warranties which cannot be disclaimed are hereby limited to a term of one year from the date of original retail purchase. Meade reserves the right to change product specifications or to discontinue productions without prior notice. Carefully package your binocular/digital camera to avoid shipping damage; use a thick-walled carton box for mailing. Enclose a written statement detailing the exact nature of the service needed. Be sure to include the RGA number, your name, address, plus daytime and evening telephone numbers. Enclose $20. 00 to cover handling and return-shipping, by check or money order payable to "Meade Instruments. " Non-warranty repairs may entail additional charges which will be confirmed with you before any binocular/digital camera repairs are initiated. Insure the package and send your binocular/digital camera, freight prepaid, to: Meade Instruments Corporation, Attn: Binocular/Digital Camera Repair 6001 Oak Canyon, Irvine, California 92618 ® The name "Meade, " and the Meade logo, are trademarks registered with the U. S. © 2002 Meade Instruments Corporation. 2. Self-Timer Mode with 10 second delay. picture download/editing program installation is complete, you will then be returned to the installation start screen. 3. Driver Installation 3. Erase All Images Mode. A software driver is required for your PC to recognize the CaptureView camera. Please install the driver before connecting the CaptureView to your PC. If necessary, navigate to your CD drive, open the Driver folder and then click the Open button. Please substitute your CD drive letter for D as appropriate for your CD drive. ) disconnect your CaptureView using the procedure outlined in this section. VII. Maintenance 4. Click the OK button in the next window. Operating Environment: 41° to 104° F (5° to 40° C). 20%-85% relative humidity, non-condensing. 4. Erase Last Picture Mode. Click on "Install Driver" on the software installation start screen and follow the prompts. The driver loaded is called ScopeCam, which is how you will find your CaptureView camera listed within the image download/editing program. When prompted, restart your computer. 5. Windows again asks for the installation disk. Click the OK button. Care of your CaptureView 6. Windows is now looking for another system file. Repeat steps 2-4. 1. 7. When Windows loads, connect CaptureView to the computer's USB port as depicted in Fig. [. . . ] 640 x 480 / 320 x 240 Camera Aperture . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . f/5. 6; Fixed Lens Camera Optimum Range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . to Infinity 35mm Lens Equivalent . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 400mm Memory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE MEADE CAPTUREVIEW8X22(CVB1001)




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual MEADE CAPTUREVIEW8X22(CVB1001) will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.