User manual MEADE ALTERNATE TRAY ADDENDUM

[. . . ] Operating Instructions Addendum Alternate Tray Assembly For use with Meade NG/NGC Series Telescopes Introduction Introduction Some NGC/NG models are now shipped with a third style tray. [. . . ] Using a Phillips-head screwdriver, thread one of the short screws through the holes. Repeat this procedure until all 3 leg braces are mounted on the 3 leg brace supports. · To attach the accessory tray to the leg braces, place the round accessory tray over the mounting bolt hole (Fig. Thread the bolt on the bottom of the accesory tray into the the mounting bolt hole (Fig. Tighten to a firm feel, but do not overtighten-- you will need to remove the tray if you wish to collapse the tripod. A: Attach the leg braces to the leg brace supports. · Mounting bolt hole If you have a question concerning use of the Meade NG/NGC Telescopes, call the Meade Instruments Customer Service Department at (949) 451-1450, or fax to (949) 451-1460. [. . . ] C: Place tray onto the mounting bolt hole and thread the bolt on the bottom of the tray into the mounting bolt hole. Part no. [. . . ]