User manual MCINTOSH MVP871 DVD/CD PLAYER

[. . . ] Audio Video Player Manufactured under license from Dolby Laboratories. "Dolby", "MLP Lossless" and the double-D symbol are trademarks of Dolby Laboratories. HDMI, the HDMI long and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC. This product incorporates copyright protection technology that is protected by U. S. [. . . ] Refer to figure 32. Note: The title of the icon button-bar will change color from yellow (the cursor color) to blue indicating the selected item. 4. Return to the Video Setup Menu by pressing the Left followed by the Up directional Push-buttons. If no other changes are to be made in Setup Mode at this time, exit by pressing the RTRN (Return) Push-button. Squeeze Mode When the MVP871 is connected to a TV/Monitor with either a Component Video or HDMI connection and the TV Aspect Ratio is set to 16:9 and a video source with an Aspect Radio of 4:3 is displayed, the image will be stretched out. The Squeeze Mode will compensate by displaying the 4:3 image in the center of the screen. Press the SETUP Push-button on the supplied Remote Control to access the Language Setup Menu. Then press the Right directional Push-button to select the Video Menu Icon Tab. Refer to figure 24. Note: If there is a Disc playing in the MVP871 press the STOP Push-button twice before pressing the SETUP Push-button. Note: The SETUP Push-button may also be pressed to exit the setup mode. 2. Use the Down directional Push-button on the Remote Control to select the AUDIO/VIDEO SYNC Menu. To change from the default setting use the Right directional Push-butFigure 31 ton followed by 28 2. Use the Down directional Push-button on the Remote Control to select the SQUEEZE MODE Menu. To change from the default setting use the Right directional Push-button followed by Up or Down directional Push-buttons and then press the SELECT Push-button. SETUP, con't 4. Return to the Video Setup Menu by pressing the Left followed by the Up directional Push-buttons. If no other changes are to be made in Setup Mode at this time, exit by pressing the RTRN (Return) Pushbutton. Progressive Mode When the Component Video Output (Analog Video) is connected to the TV/Monitor and the Progessive Mode is set to Auto (default setting) the MVP871 will produce the best possible picture quality. The two additional Modes of Progressive Scan "Video1" and "Video2" allow for manual override when the Progressive Scan Circuits can not detemine whether the video signal is film or video based. Video1 setting will look best with Video Source material and Video2 will look best with Film Source material. For additional important information on using the Component Video Outputs and the Progressive Scan Mode refer to "Component Video" on page 27. Press the SETUP Push-button on the supplied Remote Control to access the Language Setup Menu. Then press the Right directional Push-button to select the Video Menu Icon Tab. Refer to figure 24. Note: If there is a Disc playing in the MVP871 press the STOP Pushbutton Note: The SETUP Push-button may also be pressed to exit the setup mode. Note: The title of the icon buttonbar will change color from yellow (the cursor Figure 33 color) to blue indicating the selected item. 2. [. . . ] If no other adjustments are to be made at this time, exit by pressing PIC ADJ Push-button. Press the Down directional Push-button to activate the Dynamic Noise Reduction (DNR) Setting; use the Up or Down directional Push-buttons to adjust the reduction of noise in the image from a setting of 0 to +3. 48 How to Operate the MVP871, con't 13. Press the Right directional Push-button to select the Moving Pictures Experts Group Figure 88 (MPEG) Noise Reduction (NR) Level Setting. Use the Up or Down directional Push-buttons to reduce noise of the contours arround letter charcters and other similar objects present in the image, the setting is ON or OFF. [. . . ]