User manual MCCULLOCH RE125T92

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual MCCULLOCH RE125T92. We hope that this MCCULLOCH RE125T92 user guide will be useful to you.


MCCULLOCH RE125T92 : Download the complete user guide (1878 Ko)

You may also download the following manuals related to this product:

   MCCULLOCH RE125T92 (3828 ko)
   MCCULLOCH RE125T92 (3828 ko)
   MCCULLOCH RE125T92 (3828 ko)
   MCCULLOCH RE125T92 (3828 ko)
   MCCULLOCH RE125T92 (2219 ko)
   MCCULLOCH RE125T92 (2219 ko)
   MCCULLOCH RE125T92 (3744 ko)
   MCCULLOCH RE125T92 (2219 ko)
   MCCULLOCH RE125T92 (3744 ko)
   MCCULLOCH RE125T92 (2219 ko)
   MCCULLOCH RE125T92 (3744 ko)
   MCCULLOCH RE125T92 (2219 ko)
   MCCULLOCH RE125T92 (3744 ko)
   MCCULLOCH RE125T92 (2219 ko)
   MCCULLOCH RE125T92 (3744 ko)
   MCCULLOCH RE125T92 (3828 ko)
   MCCULLOCH RE125T92 (3744 ko)
   MCCULLOCH RE125T92 (3828 ko)

Manual abstract: user guide MCCULLOCH RE125T92

Detailed instructions for use are in the User's Guide.

[. . . ] Please read these instructions carefully and make sure you understand them before using this machine. â· Never allow children or people unfamiliar with the instructions to use the lawnmower. â· Never mow while people, especially children, or pets are nearby. â· Keep in mind that the operator or user is responsible for accidents or hazards occurring to other people or their property. [. . . ] Stop the machine before changing from reverse to forward gear, or the opposite. Gear changing between the forward gears must not take place when the machine is in motion. Move the lever forward to connect the drive to the cutting unit, whereby the drive belt is tensioned and the blades begin to rotate. If the lever is moved backwards the drive will be disconnected and the rotation of the blades slowed down by the action of the brake shoes on the pulley. Quick lifting/lowering of the cutting unit Pull the lever backwards to quickly lift the cutting unit when passing over irregularities in the lawn, etc. During transportation the cutting unit shall be in the highest position. There are four different positions for the ignition key: OFF All electric current broken. Reverse Operation System (ROS) - Allows operation of mower deck or other powered attachment while in reverse (See section 5 - "Driving"). Never leave the key in the ignition lock when leaving the machine on its own. To release the parking brake all that is necessary is to push down the brake pedal. When the engine is cold the choke should be pulled out before starting. When the engine has started and is running smoothly push the choke in. Do not smoke when filling with petrol or fill up when the engine is warm. The combined oil refilling cap and the oil stick is accessible when the bonnet is lifted forwards. If more oil is needed add SAE 30 oil to the "FULL " marking. SAE 5W-30 oil should be used during the winter (below freezing point). Make sure that the cutting unit is in the transport position (top position) and that the lever for connection/disconnection of the cutting unit is in the disconnection position. If the engine will not start, wait about 10 seconds before the next try. Let the ignition key return to the "ON" position when the engine has started and push in the choke control as soon as the engine is running smoothly. The machine is equipped with a safety switch which immediately breaks the current to the engine if the driver leaves the seat with engine running and with the connection/disconnection lever in position "connection". Choose a driving speed which suits the terrain and required cutting results. Any attempt by the operator to travel in the reverse direction with the attachment clutch engaged will shut off the engine unless ignition key is placed in the ROS "ON" position. [. . . ] Park tractor on a level, dry concrete or paved surface, depress brake pedal all the way down and engage parking brake. The rear wheels must lock and skid when you try to manually push the tractor forward. Remove the small retainer spring (2) and lift clutch spring off the pulley bolt. Remove the large retainer spring (3), slide collar off and push housing guide out of the bracket. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE MCCULLOCH RE125T92




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual MCCULLOCH RE125T92 will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.