User manual MCCULLOCH MCT203A18

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual MCCULLOCH MCT203A18. We hope that this MCCULLOCH MCT203A18 user guide will be useful to you.


MCCULLOCH MCT203A18 : Download the complete user guide (988 Ko)

Manual abstract: user guide MCCULLOCH MCT203A18

Detailed instructions for use are in the User's Guide.

[. . . ] When using an electrical power tool, basic precautions should always be followed to assure maximum safety and optimum performance. Failure to comply with instructions may result in electrical shock, burns, fire, or personal injury. mINIMUM WIRE GAUGE RECOMMENDATIONS VOLTS 120 EXTENSION CORD LENGTH 25 feet / 7. Stay alert, watch what you are doing and use common sense when operating a power tool. [. . . ] Maintain hedge trimmer, keep cutting blades sharp and clean for best performance and to reduce the risk of injury. FOLLOW ALL SAFETY INSTRUCTIONS listed in this manual before/during operation of this trimmer. TO REDUCE THE RISK OF ELECTRIC SHOCK this power tool has a polarized plug (one blade is wider than the other). If it still does not fit, contact a qualified electrician to install the proper outlet. Never use unit if cord or plug has been damaged, the motor or unit itself is not working as it should or has been dropped, damaged, left outdoors or dropped in water. Replace damaged parts that are chipped, cracked or damaged in any way. Power tool built with this insulation system are not intended to be grounded. As a result, the extension cord used with your unit can be plugged into any conventional 120 volt electrical outlet. Normal safety precautions must be observed when operating an electrical power tool. The double insulation system is only for added protection against injury resulting from a possible internal electrical insulation failure. GROUND FAULT CIRCUIT INTERRUPTER (GFCI) receptacle may be used on an outlet or circuit for an added measure of safety. A 2-wire cord without a ground connection may be used since this power tool is double insulated. When using the power tool, an extension cord of adequate size must be used for safety and to prevent loss of power and overheating. The extension cord must be specifically intended for outdoor use and marked "SJ" or "SJT" and with the suffix "WA". Inspect extension power cord for loose or exposed wires and damaged insulation. DO NOT ABUSE CORD - Never carry power tool by cord or pull cord to disconnect from outlet. For service information, contact the McCulloch Product Service Department listed on the back cover of this User Manual. Use of rubber gloves and substantial footwear is recommended when working outdoors. Don't wear loose clothing or jewelry; they can be caught in moving parts. Use of rubber gloves and substantial footwear is recommended when working outdoors. A WARNING identifies a procedure which, if not undertaken or if improperly done, can result in a serious personal injury or damage to the unit and/or both. (WARRANTY SYMBOL) serves notice that unless instructions or procedures are followed, any damage will void the warranty and repairs will be at owner's expense. [. . . ] Any component(s) or accessories not sold or manufactured by the Warrantor. This warranty does not apply to accessories, normal maintenance or adjustment(s) of the product set forth in the User Manual(s). Repair or replace components which have failed within the duration of the applicable warranty period at no cost to the User. Ensure that the authorized repair station is reimbursed for parts and labor costs incurred due to performance of a warranty repair in accordance with established warranty policies and procedures. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE MCCULLOCH MCT203A18




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual MCCULLOCH MCT203A18 will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.