User manual MCCULLOCH HG 63

[. . . ] ß Ò Ý ïóïò ÍßÚÛÌÇ ÉßÎÒ×ÒÙÿ ß When using this product, basic preacutions should always be followed: 1. The jet must not be directed at persons, animals, elecÍ trical devices, or the machine itself. Handle On-Off Switch High Pressure Outlet Detergent Sprayer Chemical Tank Connector Cleaning needle Water inlet filter Spray Wand Wand Extension Trigger Gun High Pressure Hose Water Inlet with Filter Power Cord Safety Lock Storage Storage for gun & lance Wheel To reduce the risk of injury, do not operate the machine near children. Í Ð ß ïóïò ÍßÚÛÌÇ ÉßÎÒ×ÒÙÿ oe When using this product, basic preacutions should always be followed: Ñ 1. [. . . ] The gun Safety Lock PREVENTS the trigger from accidentally being engaged. If it should malfunction or breakdown, grounding provides a path of least resistance Í for the electric current to reduce the risk of electric shock. This product is equipped with a cord having an equipment Ø grounding conductor and a grounding plug. The plug must be plugged into an appropriate outlet that is properly installed and grounded in accordance with local codes and ordinances. ÜßÒÙÛÎæ Improper connection of the equipment grounding conductor can result in a risk of electrocution. Check with a qualified electrician or service personel if you are in doubt as to wether the outlet is properly grounded. Do not modify the plug provided with the product - if it will not fit the outlet, have a proper outlet installed by a qualified electrician. To reduce the risk of electrocution, keep all connections dry and off the ground. óîò ÙÛÒÛÎßÔ ÍßÚÛÌÇ ÎËÔÛÍ 1. Water spraying from a leak is capable of injecting material into skin. Locate this pressure washer in areas away from combustible materials, combustible fumes or dust. Use of these personal safety items is highly recommended to reduce the risk of accidental injury. Connect the connector (H) to male connector (E), which is linked to garden hose. Connect garden hose to the cold water source and turn water on completely. Pull the trigger (K) to allow water to flow through and eliminate any trapped air. 3-2E) G L I S Water supply must be on and water discharge visible at nozzle before activating ON/OFF switch. Your pressure cleaner is fltted with This means the motor and pump will start only when the trigger lever is pressed and shut off when it is released. NOTE: Make sure the unit is turned off and the water pressure is released before changing accessories. Connect the detergent spreyer (B) to trigger gun (C) by pushing in and turning clockwise to lock. USE OF CLEANING AGENTS NOTE: Use only cleaning solutions recommended for high pressure cleaners. S Pressure washers use the power of water to clean without the need for chemicals or detergents, although most machines also have an option for adding cleaning fluids or wash and wax detergents if necessary. The spray angle can be adjusted from 0 to 30 by twisting the spray nozzle (A). [. . . ] Before performing any work on the machine, ensure it is unplugged from the main electrical supply and the water pressure has been released. Close the water tap and operate the trigger to relieve pressure in the machine and hose. Irregular or too high water pressure indicates clogging or calcium accumulation in the nozzle. Unclog the spray nozzle with cleaning needle and clean the filter in the water N inlet. [. . . ]