User manual MCCULLOCH FH160G

[. . . ] Damage or conditions which render this product inoperable caused by improper maintenance practices will void the manufacturer's warranty. When using an electrical appliance, basic precautions should always be followed to assure maximum safety and optimum performance. Failure to comply with instrucE tions may result in electrical shock, burns, fire, or personal injury. [. . . ] Locate this pressure washer in areas away from combustible materials, combustible fumes or dust. Some chemicals or detergents may be harmful if inhaled or ingested, causing severe nausea, fainting or poisoning. Before starting the pressure washer in cold weather, check all parts of the equipment and be sure ice has not formed there. Units with broken of missing parts, or without protective housing or covers should NEVER be operated. High pressure stream of water that this equipment produces can pierce skin and its underlying tissues, leading to serious injury and possible amputation. Always wear eye protection when you use this equipment or when you are in vicinity where the equipment is in use. Use a respirator or mask whenever there is a chance that vapors may be inhaled. Read all instructions with the mask so you are certain the mask will provide the necessary protection against inhaling harmful vapors. Keep the hose connected to machine and the spray gun while the system is pressurized. Keep water spray away from electric wiring or fatal electric shock may result. Flow rate can be determined by running the water for one minute into an empty 5-gallon container. Never use the pressure washer to draw in water contaminated with solvents, e. Always prevent debris from being drawn into the unit by using a clean water source. This machine has been designed for use with cleaning detergent supplied or recommended by the manufacturer. The E use of other cleaning detergents may affect the operation of the machine and void the warranty. A NOTE is used to convey additional information, or highlight a particular explanation, or to expand a step instrucL tion. [. . . ] Irregular or too high water pressure indicates clogging or calcium accumulation in the nozzle. Unclog the spray nozzle with cleaning needle and clean the filter in the water N inlet. L I S H Any other servicing should be performed by an authorized sevice personnel. [. . . ]