User manual MCCULLOCH FB4052

[. . . ] Do not use it in areas where fumes from paint, solvents or flammable liquids pose a potential hazard. Other people should keep a safe distance from the work area, especially when the log splitter is under operations. [. . . ] It can be stored or transported under ambient temperatures between -25°C and 55°C. Take used oil to an authorized collection point or follow the stipulations in the country where the log splitter is used. Store the log splitter away from children and others not qualified to use it. 61 Lbs (43 kg) The diameter of the log is indicative - a small log can be difficult to split when it has knobs or a particularly tough fiber. On the other hand, it may not be difficult to split logs with regular fibers even if its diameter exceeds the max. Bolt the Support Leg to the Log Splitter, lift the log splitter by the handles at both ends and place it on a 60 - 75cm high, stable, flat and level work surface. Familiarize yourself with the controls and features of this log splitter in the illustrations. Max pressure was set before the log splitter ex work and the max pressure limiting screw is sealed with glue to ensure the log splitter works under pressure no more than 4 tons. The setting was done by qualified mechanic with professional instruments. Unauthorized resetting will cause the hydraulic pump fail to output enough splitting pressure or RESULT IN SERIOUS INJURY AS WELL AS DAMAGE TO THE MACHINE . Before operating the log splitter, the Bleed Screw should be loosened by some rotations until air can go in and out of the oil tank smoothly. Air flow thru the Bleed Screw hole should be detectable during the log splitter is under operations. Before moving the log splitter, make sure the Bleed Screw is tightened to avoid oil leaking from this point. After the log pusher moves back and completely stops at its starting position, insert a wedge wood under the jammed log. [. . . ] Make sure the level of the refilled oil is just between 2 grooves around the Dipstick. Make sure they are tightened to avoid leakage before place the log splitter horizontally. [. . . ]