User manual MCCULLOCH CABRIO 433L

[. . . ] Electrolux Outdoor Products manufacture products for a number of well known brands under various registered patents, designs and trademarks in several countries. Electrolux Outdoor Products Italy MANUAL DO OPERADOR D WICHTIGE INFORMATION: Lesen Sie diese Hinweise zur Handha-bung des Gerts aufmerksam durch. Verwenden Sie es erst, wenn Sie sicher sind, da Sie alle Anweisungen verstanden haben und gut aufbewahren. P INFORMAES IMPORTANTES: Queira ler cuidadosamente estas instrues e tenha certeza de entend--las antes de usar a serra e guarde para consulta futura. MANUAL DE INSTRUCCIONES EXEIPIIO XEIPIMOE E INFORMACIN IMPORTANTE: Lea atentamente las instrucciones y asegrese de entenderlas antes de utilizar esta aparato. Conserve las instrucciones para la referencia en el futuro. GR HMANTIKE HPOOPIE: oxx v x ov v xvo v o v x u v u u v. The Electrolux Group. [. . . ] Pay careful attention to safety recommendations as you might put your life or somebody else's in danger as a result of: a) possible contact with cutting or rotating parts. WARNING: do not start engine if it is not attached to the shaft as the clutch might disintegrate. For units equipped with a clutch, be sure the cutting attachment stops turning when the engine idles. 6 C. SAFETY USAGE This product must be held to the right of the operator's body. This will ensure exhaust fumes are directed away from the operator and will not be obstructed by the operator's clothing. If you have not used a trimmer before, spend some time in becoming familiar with the controls and method of usage before operation. Make sure that there are no loosened screws, damaged parts or fuel leakages. Replace damaged or excessively worn accessories (blades, string heads, guards). Ensure all maintenance or repair work is carried out by an authorised service center. In order to maintain performance and safety, be sure to use original spare parts and accessories. 1) Remove from the working area grit, debris, ropes, metal parts or any other object which might get entangled around the rotating parts or be dangerously projected. A blade with worn teeth besides providing poor performance might also generate a sudden thrust. This can result in a violent sideways kick caused when the blade touches against wood or solid bodies, such thrust might then cause the operator to loose control of the machine itself. Never attempt to work with a damaged blade but replace it with a new one. THRUST: can occur when using any type of circular blade within the risk area: therefore it is advisable to cut using the remaining area of the blade. A 7 A ALWAYS USE GENUINE ACCESSORIES AND SPARE PARTS AVAILABLE FROM AUTHORISED SERVICING DEALERS. THE USE OF NON-ORIGINAL ACCESSORIES AND SPARE PARTS INCREASES THE RISK OF ACCIDENTS AND IN SUCH A CASE THE COMPANY IS NOT LIABLE FOR DAMAGE TO PEOPLE AND/OR THINGS. D. This product is fitted with a 2-stroke engine and therefore requires a 2-stroke petrol and oil mix. Use leaded (4 Star) or unleaded petrol with a minimum octane rating of 90. In order to obtain a good fuel mix, put the oil into the container before the petrol. The use of sub-standard petrol or oil may reduce performance or reduce the life of certain components. Leaded Petrol If using leaded petrol, the correct fuel mix is achieved by either using 5% (20:1) of a well known brand of 2-stroke engine oil, or else 2. 5% (40:1) of special engine oil. Unleaded Petrol If using unleaded petrol, you must use a totally synthetic 2-stroke engine oil or branded 2-stroke engine oil. [. . . ] Now release the accelerator trigger (A) and then the throttle advance (B). WARNING: when the throttle advance is engaged, the head or blade rotates. 4) Press the primer bulb (C) several times until you see fuel going back to carburetor through pipe (D). 5) Move choke lever (E) to the open position then pull starter rope until engine fires. [. . . ]