User manual MAXTOR U10 INSTALLATION REV A

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual MAXTOR U10. We hope that this MAXTOR U10 user guide will be useful to you.


MAXTOR U10 INSTALLATION REV A: Download the complete user guide (220 Ko)

You may also download the following manuals related to this product:

   MAXTOR U10 REV A 01-2000 (138 ko)

Manual abstract: user guide MAXTOR U10INSTALLATION REV A

Detailed instructions for use are in the User's Guide.

[. . . ] If you are using a 40-pin 80-conductor cable, attach the blue connector to the motherboard, the black connector to the master drive, and the grey connector Co mp Mo to the slave. the uter r bo ard Master Pin 1 What You Need · Phillips screwdriver and four 6-32 UNC drive mounting screws · A standard 40-pin ATA interface cable, or an 80-conductor cable to run Ultra ATA 66 (max length: 18 inches) Slave · An unused drive power cable for your new drive Ultra ATA/66 Requirements The drive can support transfer rates up to 66 Mbytes per second (UDMA 4) in Ultra ATA/66 mode. Attach the interface connector and the power connector to the drive. Power connector Interface connector Pin 1 · A computer that supports UDMA modes 3 and 4 · A 40-pin 80-conductor cable (available from your dealer) · A software utility to confirm and activate Ultra ATA/66. [. . . ] Scandisk is a utility located on your Windows startup diskette that scans the drive for defects. Otherwise you may need to use Disk Manager, located on your diskette or CD, to achieve the full capacity of your drive. If the above steps do not solve the problem, contact your dealer or visit www. seagate. com to download SeaTools disc diagnostics software and more troubleshooting advice. Seagate Support Services Internet For online information about Seagate products, visit www. seagate. com or e-mail your disc questions to: DiscSupport@Seagate. com. Installing a Slave Drive If you are installing a second drive, or slave, to your system, use the DiscWizard software provided with your drive. If you do not want to install your drive using Disk Manager, see "Standard DOS installation" below to partition and format your drive. Technical Support If you need further help installing your drive, first consult your dealer. Dealers are familiar with their unique system configurations and can help you with system conflicts and other technical issues. If you need additional help, you can talk to a Seagate technical support specialist. Before calling, note your system configuration and drive model number. Africa Australia Austria Belgium Denmark France Germany Hong Kong Ireland Italy Middle East Netherlands Norway +31-20-316-7222 +61-2-9725-3366 0 800-20 12 90 0 800-74 876 80 88 12 66 0 800-90 90 52 0 800-182 6831 +852 2368 9918 1 800-55 21 22 800-790695 +31-20-316-7222 0 800-732 4283 800-113 91 Poland Spain Sweden Switzerland Singapore Taiwan Turkey United Kingdom USA/Canada/ Latin America Other European Countries 00 800-311 12 38 900-98 31 24 0 207 90 073 0 800-83 84 11 +65-488-7584 +886-2-2514-2237 00 800-31 92 91 4 0 800-783 5177 1-800 SEAGATE or +1-405-936-1234 + 31-20-316-7222 Standard DOS Installation !Partitioning or formatting a drive erases all data on it. Seagate assumes no liability if you erase your data. Drive Partitioning Partitioning divides the drive into sections or partitions that function as separate logical drives (labeled C, D, E, etc. ). If you have two drives installed, select your new drive from option five of the FDISK menu. Select "Create DOS partition or logical DOS drive" by pressing 1. If necessary, create an extended partition with additional logical drives. Warranty To determine the warranty status of your Seagate disc drive, contact your place of purchase or visit our Web site at www. seagate. com for more information. RMA (Return Merchandise Authorization) Run SeaTools to diagnose your drive before requesting a return authorization. In addition, please verify that your drive is defective by following the troubleshooting checklist in this guide. Seagate offers comprehensive customer support for all Seagate drives worldwide. Seagate customer service centers are the only facilities authorized to service Seagate drives. Drive return procedures vary depending on geographical location and are subject to current International Trade Regulations. Seagate assumes no responsibility for data lost during shipping or drive repair. Keep your original box and packing materials for storing or shipping your drive. [. . . ] All other trademarks are the property of their respective owners. Drive Formatting !Use the correct drive letters to prevent formatting a drive that already contains data. Proceed to "Loading the Operating System" below. Loading the Operating System 1. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE MAXTOR U10




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual MAXTOR U10 will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.