User manual MAXTOR ST43401N
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual MAXTOR ST43401N. We hope that this MAXTOR ST43401N user guide will be useful to you.
 |
You may also download the following manuals related to this product:
MAXTOR ST43401N REFERENCE MANUAL (230 ko)
Manual abstract: user guide MAXTOR ST43401N
Detailed instructions for use are in the User's Guide.
[. . . ] User's Manual
ST43402ND
ST43401N/ND
Elite Disc Drive
Contents
Preface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Electrostatic discharge protection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Important safety information and precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Wichtige Sicherheitshinweise . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] All drives and other SCSI devices are connected together and to the host with an I/O cable. The SCSI bus can have up to 16 devices attached to it as shown inFigure 7. Each end of the SCSI bus must be terminated.
Term SCSI Device 0 SCSI Device 1 SCSI Device 2 SCSI Device 3 Term SCSI Device 15 SCSI Device 14 SCSI Device 13 SCSI Device 12
Figure 7. SCSI bus configuration
18
ST43401N/ND, ST43402ND User's Manual, Rev. B
A connector (J6) at the back of the drive accepts the I/O cable that connects it to the system. The daisy-chain cable is a continuous unshielded cable having one connector for each drive it connects to. Refer to the reference manual (publication 83327730) for guidelines on I/O cabling. These guidelines discuss the use of unshielded cabling inside cabinets and shielded cabling running between cabinets. They also contain information about constructing continuous daisy-chain cabling (including part numbers for the required cabling components). Table 4 shows the pin assignments and signal names for the unshielded single-ended I/O P cable. Table 5 shows the pin assignments and signal names for the unshielded differential I/O P cable. Detailed information about interface lines is provided in the reference manual.
ST43401N/ND, ST43402ND User's Manual, Rev. Unshielded single-ended I/O cabling (P cable) Signal name DB (12) DB (13) DB (14) DB (15) DB (P1) DB (0) DB (1) DB (2) DB (3) DB (4) DB (5) DB (6) DB (7) DB (P) GROUND GROUND TERMPWR TERMPWR RESERVED GROUND ATN GROUND BSY ACK RST MSG SEL C/D REQ I/O DB (8) DB (9) DB (10) DB (11) Even pin numbers 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40 42 44 46 48 50 52 54 56 58 60 62 64 66 68 Signal name GROUND GROUND GROUND GROUND GROUND GROUND GROUND GROUND GROUND GROUND GROUND GROUND GROUND GROUND GROUND GROUND TERMPWR TERMPWR RESERVED GROUND GROUND GROUND GROUND GROUND GROUND GROUND GROUND GROUND GROUND GROUND GROUND GROUND GROUND GROUND Odd in numbers 1 3 5 7 9 11 13 15 17 19 21 23 25 27 29 31 33 35 37 39 41 43 45 47 49 51 53 55 57 59 61 63 65 67
19
Note. A minus sign indicates active low.
20
ST43401N/ND, ST43402ND User's Manual, Rev. Unshielded differential I/O cabling (P cable) Signal name DB (12) DB (13) DB (14) DB (15) DB (P1) GROUND DB (0) DB (1) DB (2) DB (3) DB (4) DB (5) DB (6) DB (7) DB (P) GROUND TERMPWR TERMPWR RESERVED ATN GROUND BSY ACK RST MSG SEL C/D REQ I/O Even pin numbers 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40 42 44 46 48 50 52 54 56 58 Signal name DB (12) DB (13) DB (14) DB (15) DB (P1) GROUND DB (0) DB (1) DB (2) DB (3) DB (4) DB (5) DB (6) DB (7) DB (P) DIFFSENS TERMPWR TERMPWR RESERVED ATN GROUND BSY ACK RST MSG SEL C/D REQ I/O Odd pin numbers 1 3 5 7 9 11 13 15 17 19 21 23 25 27 29 31 33 35 37 39 41 43 45 47 49 51 53 55 57
Note. A minus sign indicates active low.
continued
ST43401N/ND, ST43402ND User's Manual, Rev. B
continued from previous page
Signal name GROUND DB (8) DB (9) DB (10) DB (11) Notes: 1. Eight-bit devices connected to the P cable must leave the following signals open: DB (12) DB (12) DB (13) DB (13) DB (14) DB (14) DB (15) DB (15) DB (P1) DB (P1) DB (8) DB (8) DB (9) DB (9) DB (10) DB (10) DB (11) DB (11) Even pin numbers 60 62 64 66 68 Signal name GROUND DB (8) DB (9) DB (10) DB (11) Odd pin numbers 59 61 63 65 67
21
22
ST43401N/ND, ST43402ND User's Manual, Rev. B
Unpacking, inspection, and repacking
After removing the packing material, inspect the drive for shipping damage. The drive is shipped separately from any other items ordered for the installation. Allow the drive temperature to approach the ambient temperature of the unpacking area. Ensure that the temperature stabilization period meets the requirements printed on the drive container. [. . . ] Before beginning any maintenance activities, observe the following precautions: · Follow the precautions listed under "Electrostatic discharge protection" in the preface. Return the entire drive for depot repair if any circuit board is defective. Removal of circuit boards by personnel not performing depot repair will damage components and may void the warranty. · Do not remove the head and disc assembly (HDA) from the drive chassis. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE MAXTOR ST43401N
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual MAXTOR ST43401N will begin.