User manual MAXTOR ST33000651AS REV D

[. . . ] Product Manual Barracuda®XT ST32000641AS ST33000651AS 100586689 Rev. B Date 09/15/2009 11/20/2009 Description of changes Initial release. Updated drive specifications on Tables 1-3; added "Warranty" specific section. Added 3000GB (3TB) model and corresponding specifications throughout. Rev. [. . . ] For all tests, the drive is oriented with the cover facing upward. Note For seek mode tests, the drive is placed in seek mode only. The number of seeks per second is defined by the following equation: (Number of seeks per second = 0. 4 / (average latency + average access time) Table 4 Drive A-weighted Sound Power Levels (SWL, BA) Model 3000GB 2000GB Idle[1] 2. 7 bels (typ) 2. 9 bels (max) 2. 7 bels (typ) 2. 9 bels (max) Performance Seek 2. 9 bels (typ) 3. 1 bels (max) 2. 9 bels (typ) 3. 3 bels (max) [1] During periods of drive idle, some offline activity may occur according to the S. M. A. R. T. specification, which may increase acoustic and power to operational levels. 18 Barracuda XT SATA Product Manual, Rev. D www. seagate. com Drive Specifications 2. 8. 1 Test for Prominent Discrete Tones (PDTs) Seagate follows the ECMA-74 standards for measurement and identification of PDTs. An exception to this process is the use of the absolute threshold of hearing. Seagate uses this threshold curve (originated in ISO 3897) to discern tone audibility and to compensate for the inaudible components of sound prior to computation of tone ratios according to Annex D of the ECMA-74 standards. 2. 9 Electromagnetic immunity When properly installed in a representative host system, the drive operates without errors or degradation in performance when subjected to the radio frequency (RF) environments defined in the following table: Table 5 Radio frequency environments Test Electrostatic discharge Radiated RF immunity Description Contact, HCP, VCP: ± 4 kV; Air: ± 8 kV 80 to 1, 000MHz, 3 V/m, 80% AM with 1kHz sine 900MHz, 3 V/m, 50% pulse modulation @ 200Hz ± 1 kV on AC mains, ± 0. 5 kV on external I/O ± 1 kV differential, ± 2 kV common, AC mains Performance level B A Reference standard EN61000-4-2: 95 EN61000-4-3: 96 ENV 50204: 95 Electrical fast transient Surge immunity B B A C C C B EN61000-4-4: 95 EN61000-4-5: 95 EN61000-4-6: 97 EN61000-4-11: 94 Conducted RF 150kHz to 80MHz, 3 Vrms, 80% AM with 1kHz immunity sine Voltage dips, interrupts 0% open, 5 seconds 0% short, 5 seconds 40%, 0. 10 seconds 70%, 0. 01 seconds Barracuda XT SATA Product Manual, Rev. D 19 Drive Specifications www. seagate. com 2. 10 Warranty To determine the warranty for a specific drive, use a web browser to access the following web page: support. seagate. com/customer/warranty_validation. jsp From this page, click on the "Verify Your Warranty" link. You will be asked to provide the drive serial number, model number (or part number) and country of purchase. The system will display the warranty information for your drive. 2. 11 Agency certification 2. 11. 1 Safety certification These products are certified to meet the requirements of UL60950-1, CSA60950-1 and EN60950 and so marked as to the certify agency. 2. 11. 2 Electromagnetic Compatibility (EMC) Hard drives that display the CE mark comply with the European Union (EU) requirements specified in the Electromagnetic Compatibility Directive (2004/108/EC) as put into place 20 July 2007. Testing is performed to the levels specified by the product standards for Information Technology Equipment (ITE). Emission levels are defined by EN55022, Class B and the immunity levels are defined by EN55024. Although CE-marked Seagate drives comply with the directives when used in the test systems, we cannot guarantee that all systems will comply with the directives. The drive is designed for operation inside a properly designed enclosure, with properly shielded I/O cable (if necessary) and terminators on all unused I/O ports. Computer manufacturers and system integrators should confirm EMC compliance and provide CE marking for their products. Korean RRL If these drives have the Korean Communications Commission (KCC) logo, they comply with paragraph 1 of Article 11 of the Electromagnetic Compatibility control Regulation and meet the Electromagnetic Compatibility (EMC) Framework requirements of the Radio Research Laboratory (RRL) Communications Commission, Republic of Korea. These drives have been tested and comply with the Electromagnetic Interference/Electromagnetic Susceptibility (EMI/EMS) for Class B products. Drives are tested in a representative, end-user system by a Korean-recognized lab. · Family name: Barracuda · Certificate number: In process Australian C-Tick (N176) If these models have the C-Tick marking, they comply with the Australia/New Zealand Standard AS/NZ CISPR22 and meet the Electromagnetic Compatibility (EMC) Framework requirements of the Australian Communication Authority (ACA). 2. 11. 3 FCC verification These drives are intended to be contained solely within a personal computer or similar enclosure (not attached as an external device). As such, each drive is considered to be a subassembly even when it is individually marketed to the customer. As a subassembly, no Federal Communications Commission verification or certification of the device is required. Seagate has tested this device in enclosures as described above to ensure that the total assembly (enclosure, disk drive, motherboard, power supply, etc. ) does comply with the limits for a Class B computing device, pursuant to Subpart J, Part 15 of the FCC rules. Operation with noncertified assemblies is likely to result in interference to radio and television reception. [. . . ] (4163H = 0100000101100011 binary) 34xxH BE01H 4163H xx7FH 00DEH 00DEH FFFEH xxxxH 0000H ST33000651AS = 5, 860, 533, 168 ST32000641AS = 3, 907, 029, 168 0000H Each drive will have a unique value. August 2010 0000H 0001H xxxxH 0000H xxA5H 100­103 104­107 108­111 112­127 128 129­159 160­254 255 Note Note Advanced Power Management (APM) and Automatic Acoustic Management (AAM) features are not supported See the bit descriptions below for words 63, 84, and 88 of the Identify Drive data. Barracuda XT SATA Product Manual, Rev. D 33 SATA Interface www. seagate. com Description (if bit is set to 1) Bit 0 1 2 8 9 10 Bit 0 1 2 3 4 5 6 7 8 9-10 11-12 13 14 15 Bit 0 1 2 3 4 5 6 8 9 Word 63 Multiword DMA mode 0 is supported. Ultra DMA mode 1 is currently active. 34 Barracuda XT SATA Product Manual, Rev. D www. seagate. com SATA Interface 10 11 12 13 14 Ultra DMA mode 2 is currently active. [. . . ]