User manual MAXTOR M2CVM4CL
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual MAXTOR M2CVM4CL. We hope that this MAXTOR M2CVM4CL user guide will be useful to you.
 |
Manual abstract: user guide MAXTOR M2CVM4CL
Detailed instructions for use are in the User's Guide.
[. . . ] Matrox Meteor-II/Camera Link
Basics about the camera
Camera Interface Application Note JAI CV-M4CL March 26, 2002
§ § § § § § Effective resolution: 1280 × 1024 × 10-bit @ 24 fps (Full resolution). [. . . ] § Exposure time: Exposure time is determined by the shutter setting. § Camera switch settings: Refer to the camera manual for additional information. Internal and external switches should be set as follows:
External Switches Shutter 1 OFF Shutter 2 OFF Shutter 3 OFF Shutter 4 OFF Ext. Trigger 6 OFF Scan 7 OFF Scan 8 OFF Smear-less 9 OFF Control 10 OFF Internal Switches (SW50) 1 OFF ON 2 3 OFF 4 OFF
Mode 1: Continuous
§ Frame Rate: The frame rate is determined by the frequency of the external trigger signal and the exposure time period. § Exposure time: The width (falling edge to rising edge) of the EXPOSURE1 (CC1) signal is the exposure time. The exposure time can be modified in the DCF using Matrox Intellicam, with the MIL MdigControl() function. § Camera switch settings: Refer to the camera manual for additional information. Internal and external switches should be set as follows:
External Switches Shutter 1 OFF Shutter 2 OFF Shutter 3 OFF Shutter 4 OFF Ext. [. . . ] Dorval, Quebec H9P 2T4 Canada Tel: (514) 685-2630 Fax: (514) 822-6273
MET2-CID-077
3 [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE MAXTOR M2CVM4CL
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual MAXTOR M2CVM4CL will begin.