User manual MAXTOR LYRION SERIES IDE REV B 5-2007

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual MAXTOR LYRION SERIES IDE. We hope that this MAXTOR LYRION SERIES IDE user guide will be useful to you.


MAXTOR LYRION SERIES IDE REV B 5-2007: Download the complete user guide (686 Ko)

You may also download the following manuals related to this product:

   MAXTOR LYRION SERIES IDE REV F 9-2007 (883 ko)

Manual abstract: user guide MAXTOR LYRION SERIES IDEREV B 5-2007

Detailed instructions for use are in the User's Guide.

[. . . ] Product Manual Lyrion Series IDE ST760211DE ST730212DE 100462437 Rev. B May 2007 Revision history Revision Date Sheets affected or comments Rev. Front cover, 1, 3-4, 9-11, 21-22, 26 and 28-31. Copyright © 2007 Seagate Technology LLC. B May 2007 Seagate, Seagate Technology and the Wave logo are registered trademarks of Seagate Technology LLC in the United States and/or other countries. [. . . ] B 2. 12 2. 12. 1 Agency certification Safety certification The drives are recognized in accordance with UL60950-1, CAN/CSA-C22. 2 No. 60950-1, EN60950 and IEC 60950. 2. 12. 2 Electromagnetic compatibility Hard drives that display the CE mark comply with the European Union (EU) requirements specified in the Electromagnetic Compatibility Directive (89/336/EEC). Testing is performed to the levels specified by the product standards for Information Technology Equipment (ITE). Emission levels are defined by EN 55022, Class B and the immunity levels are defined by EN 55024. Seagate uses an independent laboratory to confirm compliance with the EC directives specified in the previous paragraph. Although CE-marked Seagate drives comply with the directives when used in the test systems, we cannot guarantee that all systems will comply with the directives. The drive is designed for operation inside a properly designed enclosure, with properly shielded I/O cable (if necessary) and terminators on all unused I/O ports. Computer manufacturers and system integrators should confirm EMC compliance and provide CE marking for their products. Korean RRL If these drives have the Korea Ministry of Information and Communication (MIC) logo, they comply with paragraph 1 of Article 11 of the Electromagnetic Compatibility control Regulation and meet the Electromagnetic Compatibility (EMC) Framework requirements of the Radio Research Laboratory (RRL) Ministry of Information and Communication Republic of Korea. These drives have been tested and comply with the Electromagnetic Interference/Electromagnetic Susceptibility (EMI/EMS) for Class B products. Drives are tested in a representative, end-user system by a Korean-recognized lab. · Family name: · Certificate numbers: Lyrion Series STX-S181 (B) Australian C-Tick (N176) If these models have the C-Tick marking, they comply with the Australia/New Zealand Standard AS/NZS3548 1995 and meet the Electromagnetic Compatibility (EMC) Framework requirements of the Australian Communication Authority (ACA). 2. 12. 3 European Union Restriction of Hazardous Substances (RoHS) Directive Seagate designs its products to meet environmental protection requirements worldwide, including regulations restricting certain chemical substances. A new law, the European Union Restriction of Hazardous Substances (RoHS) Directive, restricts the presence of chemical substances, including Lead, Cadmium, Mercury, Hexavalent Chromium, PBB and PBDE, in electronic products, effective July 2006. This drive is manufactured with components and materials that comply with the RoHS Directive. Lyrion Series IDE Product Manual, Rev. B 15 2. 12. 4 China Restriction of Hazardous Substances (RoHS) Directive 2. 12. 4 This product has an Environmental Protection Use Period (EPUP) of 20 years. The following table contains information mandated by China's "Marking Requirements for Control of Pollution Caused by Electronic Information Products" Standard. "O" indicates the hazardous and toxic substance content of the part (at the homogenous material level) is lower than the threshold defined by the China RoHS MCV Standard. "O"RoHS MCV "X" indicates the hazardous and toxic substance content of the part (at the homogenous material level) is over the threshold defined by the China RoHS MCV Standard. "X "RoHS MCV 2. 12. 5 FCC verification These drives are intended to be contained solely within a personal computer or similar enclosure (not attached as an external device). As such, each drive is considered to be a subassembly even when it is individually marketed to the customer. As a subassembly, no Federal Communications Commission verification or certification of the device is required. Seagate Technology LLC has tested this device in enclosures as described above to ensure that the total assembly (enclosure, disc drive, motherboard, power supply, etc. ) does comply with the limits for a Class B computing device, pursuant to Subpart J, Part 15 of the FCC rules. Operation with noncertified assemblies is likely to result in interference to radio and television reception. Radio and television interference. This equipment generates and uses radio frequency energy and if not installed and used in strict accordance with the manufacturer's instructions, may cause interference to radio and television reception. This equipment is designed to provide reasonable protection against such interference in a residential installation. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause interference to radio or television, which can be determined by turning the equipment on and off, you are encouraged to try one or more of the following corrective measures: · Reorient the receiving antenna. · Plug the computer into a different outlet so that the receiver and computer are on different branch outlets. 16 Lyrion Series IDE Product Manual, Rev. [. . . ] Disable Advanced Power Management (APM) Enable Read Look-Ahead . The following drive features are set after a Power On Reset, Hardware Reset or Software Reset. Transfer mode : Power On Reset PIO 4, MDMA 2 Hardware Reset PIO 4, MDMA 2 Software Reset Current setting Write Cache : Power On Reset Enabled Hardware Reset Enabled Software Reset Current setting Read look-ahead : Power On Reset Enabled Hardware Reset Enabled Software Reset Current setting APM : Power On Reset Hardware Reset Software Reset C0h Current setting Current setting 30 Lyrion Series IDE Product Manual, Rev. B 4. 3 Register default values The following table descibes the taskfile register default values following Power On Reset, Hardware Reset and Software Reset. Table 11: Register default values Power On Reset Hardware Reset 01h 01h 01h 00h 00h 00h 50h 50h Software Reset 01h 01h 01h 00h 00h 00h 50h 50h Error register Sector Count register Sector Number register Cylinder Lo register Cylinder Hi register Device/Head register Status register Alt Status register 01h 01h 01h 00h 00h 00h 50h 50h Lyrion Series IDE Product Manual, Rev. B 5. 0 Internet Seagate Technology support services For information regarding Seagate products and services, visit www. seagate. com. Worldwide support is available 24 hours daily by email for your questions. Presales Support: Presales@Seagate. com Technical Support: DiscSupport@Seagate. com Warranty Support: http://www. seagate. com/support/service/index. html mySeagate my. seagate. com is the industry's first Web portal designed specifically for OEMs and distributors. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE MAXTOR LYRION SERIES IDE




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual MAXTOR LYRION SERIES IDE will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.