User manual MAXTOR GPMF702

[. . . ] Non-standard cameras working with Matrox Pulsar Panasonic GP-MF702 Camera Interface Overview Camera Interface Details · · · · · · · · Application Note: November 16, 1995 RS-170 - 640 x 480 x 8 @ 30 fps TTL hsync and vsync Non-interlaced RS-170 - 640 x 480 x 8 @ 30 fps Non-interlaced Continuous video Camera sending TTL hsync and vsync data to Matrox Pulsar DCF used: GPMF702N. DCF IMG-7W2-TO-BNC (or IMG-7W2-TO-5BNC) and PLS-TTL-CABLE required Video input BNC of the IMG-7W2-TO-BNC (or IMG-7W2-TO-5BNC) cable should be connected to Video Output Connector (BNC) of the camera Cable connections between the DB-37 connector of PLS-TTL-CABLE and the 12-pin connector of the camera are as follows: PLS-TLL-CABLE (DB-37 connector) Pin name GROUND GROUND TTL_VSYNC TTL_HSYNC PANASONIC GP-MF702 (12-pin connector) Pin name Pin no. [. . . ] The aforementioned load resistors must be connected in order to protect Matrox Pulsar hardware The DCF(s) mentioned in this application note can be found on the MIL and MIL-Lite CD, or our FTP site (ftp. matrox. com). Please verify all interface connections with camera documentation or manual. Contact your local sales representative or Matrox Sales office or Matrox Imaging Applications at 514-822-6061 for assistance. Corporate Headquarters: Canada and U. S. A. Dorval, Quebec, Canada H9P 2T4 Tel: (514) 685-7230 Fax: (514) 822-6273 Sales Offices: U. K. [. . . ] 1901, 19/F, Workington Tower, 78 Bonham Strand E. , Sheung Wan, Hong Kong. [. . . ]