User manual MAXTOR C474295

[. . . ] Application Note: Hamamatsu C4742-95 Camera Descriptions · · · · Interfacing non-standard cameras to Matrox Pulsar April 04, 1997 1280 (H) x 1024 (V). [. . . ] DCF used: P4742DNB. DCF Application Note: Interfacing non-standard cameras to Matrox Pulsar Hamamatsu C4742-95 Camera Interface Details Mode 1: Continuous mode (Full resolution) · April 04, 1997 · · Matrox Pulsar is SLAVE in this mode, in other words the camera sends the RS-422 (10-bit) Video, RS-422 HSYNC, RS-422 VSYNC and RS-422 Pixel clock in continuous mode to Matrox Pulsar. The camera's parameters are set using the C4742-95 controller software. The correct commands for this mode should be set to: n AMD N (Free run) n SHA F (1280 x 1024 mode) n SMD N (Normal read) n NMD N (Normal exposure) Mode 2: Continuous mode (Binning) · · · Matrox Pulsar is SLAVE in this mode, in other words the camera sends the RS-422 (10-bit) Video, RS-422 HSYNC, RS-422 VSYNC and RS-422 Pixel clock in continuous mode to the Matrox Pulsar. The camera's parameters are set using the C4742-95 controller software. The correct commands for this mode should be set to: n AMD N (Free run) n SHA F (1280 x 1024 mode) n SMD S (Binning read) n NMD N (Normal exposure) Cabling Requirements Mode 1: Continuous mode (Full resolution) · · PULSAR/DIG/MOD board required for digital data, syncs and control signals in RS-422 format. The connections between the PULSAR/DIG/MOD and the 68-pin connector of the camera are as follows: PULSAR/DIG/MOD (PLS/CBL/OPEN connector) Pin name Pin no CLOCK, INPUT, 63 CLOCK, INPUT, + 29 HSYNC, INPUT, 60 HSYNC, INPUT, + 26 VSYNC, INPUT, 59 VSYNC, INPUT, + 25 DATA, INPUT, 0 54 DATA, INPUT, 0 + 20 (Pin-out continued) Hamamatsu C4742-95 (68-pin connector) Pin name PIXCLK PIXCLK + HVALID HVALID + VVALID VVALID + DB0 DB0 + Pin no. 1 35 2 36 3 37 4 38 PUL-CID-038 2 Application Note: Interfacing non-standard cameras to Matrox Pulsar Hamamatsu C4742-95 Cabling Requirements (continued) DATA, INPUT, 1 DATA, INPUT, 1 + DATA, INPUT, 2 DATA, INPUT, 2 + DATA, INPUT, 3DATA, INPUT, 3 + DATA, INPUT, 4 DATA, INPUT, 4 + DATA, INPUT, 5DATA, INPUT, 5 + DATA, INPUT, 6DATA, INPUT, 6 + DATA, INPUT, 7DATA, INPUT, 7 + DATA, INPUT, 8DATA, INPUT, 8 + DATA, INPUT, 9DATA, INPUT, 9 + USER, INPUT, 0 USER, INPUT, 0 + 53 19 50 16 49 15 48 14 47 13 45 11 44 10 43 9 42 8 56 22 DB1 DB1 + DB2 DB2 + DB3 DB3 + DB4 DB4 + DB5 DB5 + DB6 DB6 + DB7 DB7 + DB8 DB8 + DB9 DB9 + A/D OVF A/D OVF + April 04, 1997 5 39 6 40 7 41 8 42 9 43 10 44 11 45 12 46 13 47 20 54 Mode 2: Continuous mode (Binning) All connections are the same as in Mode 1 : Continuous mode (Full resolution) The DCF(s) mentioned in this application note can be found on the MIL and MIL-Lite CD, or our FTP site (ftp. matrox. com). Please verify all interface connections with camera documentation or manual. [. . . ] 1901, 19/F, Workington Tower, 78 Bonham Strand E. , Sheung Wan, Hong Kong. [. . . ]