User manual MAXTOR 4110

[. . . ] Interfacing non-standard cameras to Matrox Pulsar Cohu 4110 Camera Interface Overview · · · · · · · · Application Note: July 31, 1996 739 x 484 x 8-bit digital video output (RS-422) interlaced internal hsync, vsync (RS-422) internal and external pixel clock signals (RS-422) pixel clock rate: 10 MHz or 14. 3 MHz external exposure control modes of operation: continuous (normal and multiple vertical reset), and shutter Camera Interface Details 1. [. . . ] 2 1 8 9 10 11 12 13 14 15 23 24 25 26 Interfacing non-standard cameras to Matrox Pulsar Cohu 4110 Cabling Requirements (Continued) Application Note: July 31, 1996 PULSAR/DIG/MOD (PLS/CBL/OPEN connector) Pin name Pin no. DATA4DATA5DATA6DATA7HSYNC+ HSYNCVSYNC+ VSYNCGROUND GROUND GROUND TTL_USR0 CLKIN+ CLKIN48 47 45 44 26 60 25 59 12 46 68 31 29 63 Cohu 4110 (DB-44 plug) Pin name DATA4DATA5DATA6DATA7ENABLE LINE + ENABLE LINE ENABLE FRAME + ENABLE FRAME GROUND, DIGITAL GROUND, DIGITAL GROUND INT/EXT CLOCKOUT+ CLOCKOUT- Pin no. 27 28 29 30 34 19 35 20 7 22 36 40 31 16 Special Considerations · Use Matrox Intellicam in order to modify the DCF for RS-422 external trigger input. Contact your local sales representative or Matrox Sales Office, or contact Matrox Imaging Applications at 514822-6061 for assistance (if required). The DCF(s) mentioned in this application note can be found on the MIL and MIL-Lite CD, or our FTP site (ftp. matrox. com). Please verify all interface connections with camera documentation or manual. Contact your local sales representative or Matrox Sales office or Matrox Imaging Applications at 514-822-6061 for assistance. Corporate Headquarters: Canada and U. S. A. [. . . ] 1901, 19/F, Workington Tower, 78 Bonham Strand E. , Sheung Wan, Hong Kong. [. . . ]