User manual MATTEL RESCUE HEROES POWERMAX ULTIMATE ROBOTICS VEHICLE

[. . . ] â· Close each battery compartment door and tighten each screw with a Phillips screwdriver. Insert three "AAA" (LR03) alkaline batteries, as indicated inside the battery compartment. [. . . ] â· When you are finished playing with URV, slide the power switch to the off O position. Hint: When URV hasn't been played with for a while, he goes into "standby mode" awaiting further "commands" from the remote control. URV's lights go out and his motorized arm returns to a resting position. Press the arrows on the remote control - URV walks forward, backward, left and right. Press the joystick on the remote control to move URV's motorized arm: up, down, in and out. â· To turn the ultra spotlight off and to return URV's head to his standard position, press URV's head down until it clicks back into place. To return URV's body to his standard position, press URV's shoulders down until the body clicks back into place. â· Only use the projectile (claw) supplied with this toy. Hint: This will require some force and you will hear will hear a loud "click. E You can use any Rescue HeroesTM figure with URV, but only Voice TechTM Rescue HeroesTM figures "talk" with URV. Slide the connector on the back of a Rescue HeroesTM figure up into the slot in URV's cockpit. Hints: - For proper function, make sure the connector is completely inserted into the slot. [. . . ] â· The "C" batteries in URV's feet only power his movement (walking and motorized arm). When movement begins to slow or stop, but speech and sound effects work normally, replace the "C" batteries in URV's feet. [. . . ]