User manual MASTERCRAFT PROSTAR 205 VRS 2001
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual MASTERCRAFT PROSTAR 205 VRS. We hope that this MASTERCRAFT PROSTAR 205 VRS user guide will be useful to you.
You may also download the following manuals related to this product:
MASTERCRAFT PROSTAR 205 VRS 2002 (38450 ko)
Manual abstract: user guide MASTERCRAFT PROSTAR 205 VRS2001
Detailed instructions for use are in the User's Guide.
[. . . ] If you use another power supply cord, it may cause interference with radio and television reception. DO NOT LOOK DIRECTLY INTO THE LENS WHEN THE PROJECTOR IS IN THE POWER ON MODE. CAUTION Not for use in a computer room as defined in the Standard for the Protection of Electronic Computer/ Data Processing Equipment, ANSI/NFPA 75.
EN-2
Contents
Important safeguards. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Preparing your projector. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Using the remote control. [. . . ] IMAGE REVERSE OFF Select when viewing images from the front with the projector installed on the floor. MIRROR Select when viewing images projected from the behind of the screen with the projector installed on the floor. INVERT Select when viewing images projected from the behind of the screen with the projector installed on the ceiling. MIRROR INVERT Select when viewing images from the front with the projector installed on the ceiling. LENS LOCK ENTER The LENS LOCK menu is displayed for the following settings. ZOOM/FOCUS LOCK ON / OFF Use to enable or cancel the FOCUS LOCK and ZOOM LOCK. LENS SHIFT LOCK ON / OFF Use to enable or cancel the LENS SHIFT LOCK. LENS SHIFT RESET OK Use to reset the position of the lens to the factory setting. MANUAL Use to adjust the amount of transmission signal correction when a long DVI cable is used. • Regardless of the setting of LAMP MODE, the LOW lamp mode is activated by default whenever the projector is turned on. When LAMP MODE has been set to STANDARD, the lamp mode changes from LOW to STANDARD about 2 minutes after turn-on. Choose ON when connecting the projector with a device equipped with the SCART terminal that can output RGB signal. (Available only for the input signal from the COMPUTER/COMPONENT/VIDEO IN 1 terminal. ) When the lamp operating time exceeds 3000 hours with LAMP MODE set to LOW, a warning dialog is displayed. When the lamp operating time exceeds 3800 hours with LAMP MODE set to LOW, a warning dialog is displayed. The no-signal dialog, input dialog, SCART warning dialog, auto power-off dialog, lamp warning dialog, and abnormal temperature dialog aren’t displayed. The menu settings are reset to the factory defaults (except the LANGUAGE, PASSWORD FUNCTION, IMAGE CAPTURE, and NETWORK settings).
SCART INPUT
ON / OFF
LAMP WARNING
STANDARD SHORT TERM
HIDE OSD
OFF ON OK
RESET ALL
• CINEMA MODE can be adjusted only when a TV60, TV50, 480i, 576i or 1080i signal is being displayed. • When SCART INPUT is set to ON, normal computer signals aren’t projected. • Use a commercially available SCART-Mini D-SUB 15-pin cable when connecting this projector with an AV device equipped with the SCART terminal. • Some AV devices equipped with the SCART terminal aren’t compatible with this projector. • The RESET ALL process may take some time to complete.
EN-35
Menu operation (continued)
SIGNAL menu
opt. opt.
SIGNAL
A U H V
SIGNAL
AUTO 1024 x 768 0 0 0 0 AUTO 100% ON ENTER
SIGNAL USER
60. 00 Hz 48. 36 KHz 1024 768 OK OK
?
MEMORY CALL RESOLUTION (MEMORIZE ) HORIZ. TRACKING
RESOLUTION (MEMORIZE)
VERTICAL FREQUENCY HORIZONTAL FREQUENCY HORIZ. [. . . ] Contact your dealer.
Blinking red Steady red Steady red
Off
Off
Abnormal condition POWER STATUS
Off
FILTER
Off
CONDITION
• Any of the lamp cover, and filter cover is open. (See page 57. ) Unplug the power cord from the wall outlet and contact your dealer.
Blinking green/ red
Steady*4 or
Blinking*4
Steady red or Steady green
Blinking orange
Off
Abnormal temperature • The ventilation grilles are clogged with dust or dirt. • The projector is exposed to hot air emitted from • Relocate the projector to a cooler a heating appliance. • Wait until the STATUS indicators stop blinking green and then press the POWER button. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE MASTERCRAFT PROSTAR 205 VRS
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual MASTERCRAFT PROSTAR 205 VRS will begin.