User manual MASTERCRAFT 19 SKIER 2002

[. . . ] If you use another power supply cord, it may cause interference with radio and television reception. DO NOT LOOK DIRECTLY INTO THE LENS WHEN THE PROJECTOR IS IN THE POWER ON MODE. CAUTION The attached power cord is to be used exclusively for this product. Never use it for other products. EN-2 Contents Important safeguards. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Overview. [. . . ] To reduce the temperature: Decrease Contrast B (blue) and increase Contrast R (red). • If you set Contrast R, G, and B to negative values, the brightness of the image can’t retain the original even when you maximize the value of Contrast in the Picture menu. Tint Use to adjust the tint of the projected image. Every time the  button is pressed, the image appears more greenish. Every time the  button is pressed, the image appears more reddish. To sharpen or soften the projected image (Sharpness): You can adjust the sharpness of the projected image using the menu. To cancel the menu: EN-31 4. Press the MENU button. Image adjustment (continued) Image You can set user-defined values for the brightness and hue using the menu. • The Image User menu appears. Image User Brilliant Color™ Gamma Adjust Select Dynamic MENU Exit Color Management 10 You can individually adjust the tone of red, green, blue, cyan, yellow and magenta using the menu. 3. Press the  or  button to select a color to be adjusted: Red, Green, Blue, Cyan, Yellow or Magenta. • The Color Management menu for the selected color appears on the screen. Color Management-Red Gain Saturation Hue Adjust Select MENU Exit 5. Select a setting you want to set. 0 0 0 Gamma Use this setting to set an optimal gamma value and modulation of lamp power. Dynamic Select when viewing crisp, clear images in a brightly lit room or strong daylight. Natural Select when viewing images of which colors are more faithfully reproduced. • Projector Name can be set using up to 15 characters including alphabets (capital/small), numeric characters, or marks. ← key: Shifting the position of enter cursor to the left for each character. → key: Shifting the position of enter cursor to the right for each character. DEL key: Deleting the character in the position of enter cursor for each character. • The display returns to the Network Config menu after selecting OK or CANCEL. • It may take some time to reflect the setting. 3. Press the ENTER button. • The CURRENT NETWORK PASSWORD screen appears. CURRENT NETWORK PASSWORD ∗∗∗∗∗∗∗∗∗∗∗∗∗∗∗∗∗∗∗∗∗∗∗∗∗∗∗∗∗∗∗∗ ← A N 0 B O 1 C P 2 D Q 3 E R 4 F S 5 G T 6 H U 7 I V 8 J K L Y M Z → DEL W X 9 caps CLEAR OK CANCEL 4. Press the , , , and  buttons to move the key cursor to select the characters or marks to enter, and press the ENTER button. • Password can be set using up to 32 characters including alphabets (capital/small) or numeric characters. ← key: Shifting the position of enter cursor to the left for each character. → key: Shifting the position of enter cursor to the right for each character. DEL key: Deleting the character in the position of enter cursor for each character. [. . . ] Do not touch the lens with your fingers. Kensington Lock This projector has a Kensington Security Standard connector for use with Kensington MicroSaver Security System. Refer to the information that came with the Kensington System for instructions on how to use it to secure the projector. Kensington Technology Group 2855 Campus Drive San Mateo, CA 94403, U. S. A. Phone: +1- (650)572-2700 Fax: +1- (650)572-9675 EN-56 Indicators This projector has two indicators, each of which shows the operation condition of the projector. [. . . ]