User manual MARTIN UNIVERSAL USB DMX

[. . . ] Introduction Some applications that use the Martin Universal USB-DMX box, can send more than 2 DMX universes, for example the MaxxyzPC can handle 32 DMX universes. [. . . ] Assign a DMX universe number to one of the connectors A or B by: o either increasing or decreasing the number using the arrows. o or by entering the number directly (put the cursor on the number and enter a number from 1 to 32). - Select Update to save the DMX universe number to the USB DMX box. If more USB DMX boxes are connected, select the next box to assign different DMX universe numbers. When all USB DMX boxes are configured, select Close to re-establish communication with Maxxyz PC. Notes: 1. The USB DMX configuration program will only work if firmware version v1. 06 or higher is installed. This means that if the USB DMX box is connected to another PC with MaxxyzPC installed, it will have the same DMX universe number. The USB DMX configuration tool can be used with or without running MaxxyzPC software. 3. When new firmware is available for the Martin Universal USB DMX box, you can download it from the Martin website: www. martin. com , `support' section. [. . . ] Disconnect and reconnect the USB DMX box from the USB port to activate the new firmware. - If more USB DMX boxes are connected that need a firmware upgrade, then repeat this procedure until all boxes have been upgraded. [. . . ]