User manual MARMITEK IP EYE HOUSING 10 QUICK INSTALLATION GUIDE

[. . . ] 1 Quick Installation Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 SAFETY WARNINGS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Box Contents: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Precautions for anti-lightning and anti-surging should be taken if necessary. During the course of transportation, storage and installation, the product should be avoided from incorrect operations such as heavy pressing, strong vibration etc. , which can cause damage of the product as there are sophisticated optical and electronic devices inside the machine. This product is for professional use and should be installed by a certified installer. Do not operate it in case temperature, humidity and power supply are beyond the limited stipulations. Do not place this unit on an unstable stand, tripod, bracket, or mount. The unit may fall, causing serious injury to a person and serious damage to the unit. Use only with a stand, tripod, bracket, or mount recommended by Marmitek or sold with the product. Any mounting of the unit should follow the manufacturer's instructions and should use mounting accessory recommended by manufacturer. If necessary, use a commercial lens cleaning paper to clear the lens windows. In case of improper usage or if you have altered and repaired the product yourself, all guarantees expire. Marmitek does not accept responsibility in the case of improper usage of the product or when the product is used for purposes other than specified. Marmitek does not accept responsibility for additional damage other than covered by the legal product responsibility. Keep out of reach of children. x x x 4 © MARMITEK Box Contents: Outdoor Housing Mounting Bracket Bag with 4 mounting plugs, 2 screws and Allen key External Antenna for IPEyeAnywhere 11 and 21 Smaller Ethernet cable in order to paste through the housing Poweradapter extension cable for IPEyeAnywhere camera to paste through the housing Poweradapter Quick Installation Guide Introduction The housing of the IPEyeHousing10 is rain and dustproof to protect your IP EyeAnyWhere IP Camera from adverse environment conditions. The heater has two elements so that it can operate as a heater and defroster. Extra tools needed: Spanner, 10 mm cross-slotted screwdriver drilling machine drill, 8 mm Installation Unpack the carton and carefully take out the attachments. Remove the 2 screws from the back of the housing and keep them in a save place. Slide out the back end of the housing. IPEyeHousing10 5 Wireless setup: When you have a IPEyeAnywhere 11 or 21 and want to use it wireless, pass through the cable of the external antenna. Pass through the poweradapter extension cable. Remove the original antenna and connect the antenna cable . Connect the poweradapterplug. Connect the camera to the bracket with the supplied screw and a 10 mm spanner. 6 © MARMITEK Wired setup: When you want to use a wired connection, pass through the flat Ethernet cable and the poweradapter extension cable. Connect the camera to the bracket with the supplied screw and a 10 mm spanner. IPEyeHousing10 7 Mounting the IPEyeHousing10 Slide in the back end of the housing and place the 2 screws into the back of the IPEyeHousing. Place the mounting bracket against the wall and mark the 4 holes. [. . . ] For more detailed information about the disposal of your old equipment, please contact your local authorities, waste disposal service, or the shop where you purchased the product. IPEyeHousing10 9 DECLARATION OF CONFORMITY Hereby, Marmitek BV, declares that this IPEyeHousing10 is in compliance with the essential requirements and other relevant provisions of the following Directives: DIRECTIVE 2004/108/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 15 December 2004 on the approximation of the laws of the Member States relating to electromagnetic compatibility Directive 2006/95/EC of the European Parliament and of the Council of 12 December 2006 on the harmonisation of the laws of Member States relating to electrical equipment designed for use within certain voltage limits Directive 2002/95/EC of the European Parliament and of the Council of 27 January 2003 on the restriction of the use of certain hazardous substances in electrical and electronic equipment MARMITEK BV - P. O. BOX 4257 - 5604 EG EINDHOVEN ­ THE NETHERLANDS Copyrights Marmitek is a trademark of Marmidenko B. V. Copyright and all other proprietary rights in the content (including but not limited to model numbers, software, audio, video, text and photographs) rests with Marmitek B. V. [. . . ]