User manual MARMITEK EASY ICON 10 RF

[. . . ] To prevent short circuits, this product should only be used inside and only in dry spaces. Do not expose the components of your systems to extremely high temperatures or bright light sources. In case of improper usage or if you have altered and repaired the product yourself, all guarantees expire. Marmitek does not accept responsibility in the case of improper usage of the product or when the product is used for purposes other than specified. [. . . ] When you're finished setting up Favourites, press the HOME button to go back to the Home screen. At any time, you can press the FAVOURITES key and select either the or Side Keys; or, you can press the or buttons on the remote to go to your Favourites screen. Then, pressing the Side Key next to the CNBC logo will (for example) change the channel on your Cable box to CNBC (in this example, channel 4). Pressing either or button a second time accesses the Marmitek X-10 Home Automation modules that you've set up in All Rooms. ) The All Rooms function will display all the Marmitek X-10 icons from every room you've set up. However, they are displayed in one convenient screen for you to select from. Use the Side Keys or the Navigation Buttons to select the icon you want to operate. To delete any Marmitek X-10 Single Device: Select Home/Setup/X10/Delete/The Room you want to delete from/press Side Key next to the icon you want to delete/Press OK/Select Yes. To delete a Favourite Channel Icon (TV station):Home/Setup/Favourites/Delete/Favourite Category/press Side Key next to Favourite Icon you want to delete/Press OK/Select Yes. to Clear an Entire Category of Channel Favourites: Home/Setup/More/Advanced/Clear Settings/Favourites/Favourite Category you want to clear/ Press Clear key. To Clear an Entire Room of X10 Favourites: Home/Setup/More/Advanced/Clear Settings/More/Clear X10/Room Category you want to clear (Living Room, Kitchen, etc)/Press Clear key. Also, if the default names are not in accordance with what you want, please note that 8 © MARMITEK Ensure that the transmitter end from the original remote is 40 mm or so away from the receiving end (bottom) of the EasyIcon10RF. Press the key/button on the original remote that you want to learn from for about a second and release it (press and release). You can learn commands from an existing remote and store them under the "Main" Keys on the EasyIcon10RF, or learn commands from an existing remote and store them under any of the 10 Side Keys. at the HOME screen press the Side Keys next to Setup , More , and Learn. " The question means, do you want to learn a command and place it on a Side key of the EasyIcon10RF, or do you want to learn a Main Key command and place it on a Main Key of the EasyIcon10RF. If you press a right Side Key (to select Main Keys) you are going to learn, say, the Chan Up key from an existing remote and store it under the Chan Up key on the EasyIcon10RF. Or, learn the Power key from an existing remote and store it under the Power key on the EasyIcon10RF, etc. In this example we only have a TV, Cable Box and Satellite Receiver set up, so the rest are grayed out, but you can still select any of the devices to learn commands for. You are then instructed to line up the remotes, and press the key on the EasyIcon10RF remote that you want to learn, e. Then, point the remote you want to learn commands from at the bottom of the EasyIcon10RF. Press and hold (in this example) the Power key on the other remote until the display shows that the command has been successfully learned. [. . . ] When you use a remote or sensor, you should have at least one TM13 Transceiver or Marmitek X-10 Security Console installed in your house. Am I able to increase the range of my remotes by using more Transceivers?Yes, you can use more than one TM13 Transceiver in your home when the range of your remotes is not sufficient. The TM13 is using so called collision detection to prevent signals to be disturbed when more than one TM13 is transmitting. [. . . ]