User manual MARANTZ VC4400

[. . . ] Model VC4400 User Guide 5 Disc DVD Changer Safety Precautions CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. FCC WARNING: This equipment may generate or use radio frequency energy. Changes or modifications to this equipment may cause harmful interference unless the modifications are expressly approved in the instruction manual. The user could lose the authority to operate this equipment if an unauthorized change or modification is made. REGULATORY INFORMATION: FCC Part 15 This product has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. [. . . ] Off: Video CDs with PBC are played the same way as Audio CDs. Auto Play DVD You can set up the DVD Player so a DVD disc automatically starts playing whenever the DVD is inserted. If Auto Play mode is set to On, this DVD player will search a title that playback time is long most and then play back the title automatically. On: Auto Play function is activated. Off: Auto Play function is not activated. Note The Auto Play function may not work for some DVDs. 14 Before Operation (Continued) Parental Control Rating DVD Country Code DVD Movies on DVDs may contain scenes not suitable for children. Therefore, discs may contain Parental Control information that applies to the complete disc or to certain scenes on the disc. These scenes are rated from 1 to 8, and alternatively, more suitable scenes are available for selection on some discs. The Parental Control feature allows you to prevent discs from being played by your children or to have certain discs played with alternative scenes. Disc Audio Disc Subtitle Disc Menu Rating Country Code TV Aspect Menu Language Progressive Scan Digital Audio Output Others 8 7 6 5 4 3 2 1 Unlock Change Disc Audio Disc Subtitle Disc Menu Rating Country Code TV Aspect Menu Language Progressive Scan Digital Audio Output Others Code Set US 1 Select "Rating" on the Setup menu using the 3/4 buttons. 3 Whenayou havepersonalusingathe numbered butEnter 4-digit password tons to create a 4-digit security password. then press SELECT/ENTER. When you have already entered a password; Enter a 4-digit password using the numbered buttons to confirm the personal 4-digit security password, then press SELECT/ENTER. If you make a mistake before pressing SELECT/ENTER, press CLEAR and enter 4-digit security password again. 4 Select Country 1 the setup menu. Code using the 3/4 buttons on 2 While Country Code is selected, press 2. cursor using 2 button and 5 Shift thecharacter using 3/4 buttons. select the 4 second SELECT/ENTER to 6 Pressselection, then pressconfirm your country code SETUP to exit the menu. Note Confirmation of the 4-digit password is necessary when the code is changed (see "Changing the 4-digit code" below. ). Changing the 4-digit code 1 Follow Steps 1-2 as shown above to the left (Rating). 5 Enter exactly the same code a second time and verify by pressing SELECT/ENTER. 6 Press SETUP to exit the menu. 4 Select a rating from 1 to 8 the 3/4 but4 tons. Eight (8) playback Unlock: If you select Unlock, Parental Control is not active. If you set a rating for the player, all disc scenes with the same rating or lower will be played. Higher rated scenes will not be played unless an alternative scene is available on the disc. You must enter the 4-digit password or change the rating level in order to play the disc. to confirm your 5 Press SELECT/ENTERSETUP to exit therating selection, then press menu. If you forget your 4-digit code If you forget your password, to clear the current password, follow the procedure below. 2 Use the Number buttons to enter the 6-digit number "210499". The 4-digit password is cleared. "P CLr" appears on the display for a moment. 3 Enter a new code as shown above to the left (Rating). 15 PREPARATION Enter the code of a country/area whose standards were used to rate the DVD video disc, referring to the list (See "Country Code List", page 28. ). Operation with DVD and Video CD Playing a DVD and Video CD Playback Setup DVD VCD2. 0 VCD1. 1 Turn on the TV and select the video input source connected to the DVD player. Audio system: Turn on the audio system and select the input source connected to the DVD player. Notes If Parental Control is set and the disc is not within the Rating settings (not authorized), the 4-digit code must be entered and/or the disc must be authorized (see "Parental Control", on page 15). Your player will not play discs that have a region code different from your player. The region code for this player is 1 (one). 1 Press OPEN/CLOSE to open the disc tray. [. . . ] If a DVD has been loaded, be sure to press STOP twice before proceeding. Video Mode Setting DVD VCD2. 0 VCD1. 1 With certain discs, the playback picture may be flickering or Dot Crawl is shown on straight lines. That means Vertical interpolation or De-interlace is not perfectly matched with the disc. In this case, the picture quality may be improved by changing the video mode. To change the video mode, press and hold OSD about 3 seconds during disc playback. [. . . ]