User manual MARANTZ SA-11S1

[. . . ] Model SA-11S1 User Guide Super Audio CD Player CLASS 1 LASER PRODUCT LUOKAN 1 LASERLAITE KLASS 1 LASERAPPARAT CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. WARNING TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT. ATTENTION: POUR ÉVITER LES CHOCS ÉLECTRIQUES, INTRODUIRE LA LAME LA PLUS LARGE DE LA FICHE DANS LA BORNE CORRESPON-DANTE DE LA PRISE ET POUSSER JUSQU'AU FOND. LASER SAFETY This unit employs a laser. Only a qualified service person should remove the cover or attempt to service this device, due to possible eye injury. CAUTION : USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURE OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE. IMPORTANT SAFETY INSTRUCTIONS READ BEFORE OPERATING EQUIPMENT This product was designed and manufactured to meet strict quality and safety standards. There are, however, some installation and operation precautions which you should be particularly aware of. [. . . ] When it is used connected to external component by a remote connecting cable and to audio component with a remote sensor that supports remote controls by Maranz, set this switch to the EXT. position, remote control unit cannot be used. C DIGITAL AUDIO OUT COAX. It outputs the playing Audio CD signal in digital format. This jack is to be connected with a recording device, amplifier, D/A converter, etc that has coaxial digital input using an optional coaxial digital cable. * No signal will be output when a Super Audio CD is played. G AC POWER INPUT JACK Connect the supplied power cord to this jack and a household AC power outlet. D DIGITAL AUDIO OUT OPT. It outputs the playing Audio CD signal in digital format. This jack is to be connected with a recording device, amplifier, D/A converter, etc that has optical digital input using an optional square type optical digital cable. * No signal will be output when a Super Audio CD is played. 9 ENGLISH NAMES AND FUNCTIONS DISPLAY c d e fgh i j k l mn o pq ENGLISH a a Main display b i RNDM (random) indicator This lights during random play. The time display and text information of the disc to be played as well as the setting menus and other displays appear on the main display. j AMS (auto music search) indicator This lights during AMS playback. b 1-20, (music calendar) The number of tracks recorded on the disc to be played, the number of remaining tracks to be played, and the number of tracks programmed by program play appear here. " " light when 21 or more tracks have been recorded on the disc. k CD, SACD, STEREO Disc indicator This indicates the type of disc on the disc tray. l TOTAL (total time) indicator When the total remaining time or the total program time is displayed, this lights above the display. c 3 (play) indicator This lights during disc play. m REMAIN (remaining time) indicator When the remaining playback time of a track is displayed, this lights above the display. d 8 (pause) indicator This lights when play is paused (temporarily stopped). e , ALL, 1 (repeat) indicator This lights during repeat play. n N SHP (noise shaper) indicator This lights when the noise shaper is turned on. (See page 14) f A-B (A-B repeat) indicator This lights during A-B repeat play. o FIL 1 2 3 (filter 1, filter 2, filter 3) indicator This indicates which filter among filter 1, filter 2, or filter 3 is currently selected. (See page 15) g TRK (track) indicator This lights above the display of the track number now playing, for instance. p DCF (DC filter) indicator This lights when the DC filter is turned on. (See page 14) h PROG (program) indicator This lights during program play. q D OFF (digital output off) indicator This lights when the digital output setting for the CD signal is set to off. (See page 14) 10 CONNECTIONS Depending on your amplifier/receiver/Stereo System, there are various ways to connect to this player. For correct connection please refer to instruction manuals of stereo system to be connected. Caution: Do not connect output from this unit to PHONO input of your audio system. To Analog Audio output (red) (white) To Digital Audio output w (Optional) Audio cable q (Supplied) Balanced connection cord q (Optional) e (Optional) To audio input terminals on amplifier INTEGRARED AMPLIFIER PM-11S1 To balanced input terminals on amplifier DISPLAY ATT. Example) PM-11S1 Connect to digital input terminals of receiver, D/A converter or CD recorder, etc. . VOLUME TONE PRE OUT OPERATE SPEAKER A REC OUT INPUT SELECTOR POWER ON/OFF SPEAKER B PHONES PHONO MC Left speaker Right speaker 11 ENGLISH 1. Connect the audio cable q to this unit's front speaker outputs and the stereo inputs on your amplifier, receiver or stereo system. Connect the optical cable w, coaxial cable e to the digital input on your AV amplifier, D/A converter, CD-R, etc. . * Signal will be output from the digital audio out jacks (OPT. /COAX. ) only when an Audio CD disc is played. No signal is output when playing a Super Audio CD. OPERATION * In this instruction manual, some operations can only be performed with the remote control. For operations that can be performed with buttons both on the main unit and on the remote control, the button names are shown in the mark. And for operations that can only be performed with buttons on the remote control, the button names are shown in the mark. ENGLISH CONNECTING THE POWER SUPPLY 1 Plug the power cable into AC IN jack on the back panel. NORMAL PLAYBACK 7 Super Audio CD player playback OPEN/ CLOSE SUPER AUDIO CD PLAYER SA-11S1 PLAY DISPLAY OFF STOP SOUND MODE POWER ON/OFF PAUSE A C IN q Press POWER switch to turn on. LCD 2 Turn on the power switch of the audio unit (amplifier, etc. ) 3 that is connected with this unit. The display cycles from TOC Reading No Disc (when no disc is loaded) Super Audio CD (when the start sound mode setting is Super Audio CD). w Press the OPEN/CLOSE button The disc tray comes out. To play a single (8cm) CD, place the disc with the indentation at the center of the tray. e Press r Press OPEN/CLOSE PLAY button. button. Disc type is automatically detected and playback is started. Track number and track elapsed time(minute, second) appear on the display. [. . . ] This is not a problem with this unit. ENGLISH The disc is rotating but no sound is heard. Is the amplifier's function or selector switch set to "CD" or "AUX" or such (to whatever you have connected this unit to)?* In the case of a CD-R or CD-RW disc, this problem may occur when the conditions under which its data was originally written were substandard or when the quality of the disc itself is poor. * This condition may occur in Mixed-Mode CDs, CD Extra, and other discs that have CDDA format mixed with other data. [. . . ]