User manual MARANTZ RC101E

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual MARANTZ RC101E. We hope that this MARANTZ RC101E user guide will be useful to you.


MARANTZ RC101E : Download the complete user guide (1876 Ko)

You may also download the following manuals related to this product:

   MARANTZ RC101E (1746 ko)
   MARANTZ RC101E (1746 ko)

Manual abstract: user guide MARANTZ RC101E

Detailed instructions for use are in the User's Guide.

[. . . ] Model RC101 User Guide Remote Controller NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. [. . . ] To change the amplifier on other source, press the SOURCE button twice (double-click). The code is sent, and then the amplifier source changes to DVD. 1. 1. 2. 1. Press and hold down the SOURCE button for appliance which should be controlled and press SET button until the SEND indicator blinking twice. TV : 1000 DVD : 2000 CD : 3000 DSS : 4000 The indicator will blink twice. Note: After this procedure, the selected SOURCE button is set initial code. 1. SETTING THE BACK LIGHT Each time press the buttons, illuminate button 2 seconds. To turn off back light, press and hold down the SET and 4 button until SEND indicator blinks twice. To turn on it again, press and hold down the SET and ¢ button until SEND indicator blinks twice. Initial is back light ON. Press and hold down the SOURCE button (ex TV) for the appliance which should be controlled and press SET button until the SEND indicator blinks twice. Press the 4-digit code by numeric keys for appliance (code table at the end of this book) When the procedure is successful, the SEND indicator will blink twice. Press and hold down the SOURCE button for appliance which should be controlled and press SET button until the SEND indicator blinking twice then back light flushes. 3. Note: If the indicator did not blink twice, then repeat steps 1 through 2 and try entering the same code again. Note: If a code digit is “0”, the SEND indicator will not blink. 4. PRESET MODE (When operating non-Marantz AV equipment products) This remote controller is preset with remote control codes from AV equipment by other manufacturers. When the preset codes are set, the following codes are contained in the source button of the remote controller. See the attached manufacturer number list for the preset manufacturers, devices, preset numbers, and other settings. Remote control source name TV DVD CD DSS Corresponding preset code TV DVD CD SATELLITE Device name Television DVD player CD player Satellite broadcasting tuner equipment SCANNING THE CODE TABLE Repeat step 3 three more times for remaining digits. Use 2 for the second digit, 3 for the third digit, and 4 for the fourth digit. 3. Press and hold down the SOURCE button for appliance which should be controlled and press SET button until the SEND indicator blinking twice. Aim the remote controller at the appliance and alternately press the CH+ and SOURCE ON buttons slowly. 3. 7 ENGLISH BASIC OPERATION Importants: • Some codes may be not match your equipment. • When the batteries are getting weak, the preset procedure is not successful. 4. 5. Stop when the appliance turns off. RESETTING THE CODE LEARN MODE This remote controller is capable of learning and storing codes used by other remote controls that you already own. For codes which are not learned, the remote controller will transmit either the Marantz preset codes from the initial settings, or remote codes from another manufacturer’s AV equipment which is set by the customer. The receiver sensor for the remote control signals is located at the top of the remote controller. Notes: • This remote controller is capable to learn around 60 codes. • When the batteries are getting weak , the learing procedure is not successful. 4. Select the button to be learned. When the following key learned • SOURCE buttons The learning function is unavailable for all SOURCE buttons in any mode. [. . . ] 3039, 3079, 3080, 3081, 3082, 3097 SYLVANIA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3007, 3008, 3061, 3087, 3088 THETA DIGITAL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3016, 3093, 3094, 3095, 3096 DVD Aiwa. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2036, 2037 Apex . . . . . . 2012, 2017, 2018, 2019, 2021, 2034 BOSE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2038, 2039 Denon . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2047, 2048 Funai . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE MARANTZ RC101E




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual MARANTZ RC101E will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.