User manual MARANTZ PMD351

[. . . ] Model PMD351 User Guide Combination Stereo Cassette Deck/CD Player CLASS 1 LASER PRODUCT LUOKAN 1 LASERLAITE KLASS 1 LASERAPPARAT CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product. WARNING TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT. ATTENTION: POUR ÉVITER LES CHOCS ÉLECTRIQUES, INTRODUIRE LA LAME LA PLUS LARGE DE LA FICHE DANS LA BORNE CORRESPON-DANTE DE LA PRISE ET POUSSER JUSQU'AU FOND. LASER SAFETY This unit employs a laser. Only a qualified service person should remove the cover or attempt to service this device due to possible eye injury. CAUTION : USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURE OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE. -2- ENGLISH WARNINGS CAUTIONS READ BEFORE OPERATING EQUIPMENT This product was designed and manufactured to meet strict quality and safety standards. [. . . ] TAPE IN jacks These RCA jacks should be connected to the LINE OUTPUT of your source. LINE OUT (TAPE, CD, TAPE+CD) These RCA jacks should be connected to the appropriate INPUT of your PA or monitoring system. MPX FILTER switch When recording FM broadcast with Dolby NR, set this switch to the ON position. DIGITAL OUTPUT jacks (SPDIF) This RCA jack outputs the digital signal of the CD Player. Connect this jack to other SPDIF digital inputs such as a D/A converter or digital sound processor or amplifier with SPDIF digital inputs such as the Marantz Professional CD Recorder. RC-5 REMOTE CONTROL jacks These RCA jacks are used with Marantz Professional infrared or wired remote accessories to provide remote control operation of the PMD351. These jacks can be serially linked to provide serial remote control operation of multiple RC-5 equipped products as well. REMOTE EXT (extension) jacks Connection with other Marantz Professional components equipped with REMOTE EXT. RS-232C connector Using serial communication, a host device can control this unit. · The RS-232C host can control all functions of the PMD351 externally · The PMD351 automatically transmits status data when status is changed. · The PMD351 will respond to a status request by transmitting the associated status data I FADER START jacks Upon receiving a dry switch contact closure on the jack connections, the CD Player can be switched in and out of play and play/pause mode. The Tape deck can be switched in and out of play and stop or the record and stop mode. POWER CORD 120VAC input power connector. J B Operations The following operating procedures are based on the assumption that the power switch is set to the ON position and that all input and output connections have already been made. For examples of input and output connections, please refer to the section in this manual marked "Connections". C D CASSETTE DECK OPERATION TAPE PLAYBACK 1. Set the Dolby Noise Reduction control switch to the same position as the tape was originally recorded in (i. e. tapes recorded with Dolby B noise reduction need to have this switch in the Dolby B position, tapes recorded with Dolby C noise reduction need to have this switch in the Dolby C position, and tapes recorded without Dolby Noise Reduction need to have this control set to the Off position). Press the play control button to begin play- E F G H back in the forward direction. Press the play control button to begin playback in the reverse play direction. When the tape enters into the playback mode, the indicator on the play control button will change from the flashing mode to a constant on mode to indicate playback is operating. Pressing the stop control button will stop the tape transport during playback. - 12 - ENGLISH TAPE REWIND/FAST FORWARD Regardless of the direction that the tape transport is currently in, pressing the (Fast Forward) control button will place the tape transport in the high speed fast forward mode and the tape will advance quickly (Rewind) control from left to right. Pressing the button will place the tape transport in the high speed rewind mode and the tape will retract quickly from right to left. In either the fast forward or the rewind mode, the tape transport will continue to fast forward or rewind until the stop control button is pressed or the end of the tape is reached. [. . . ] 133mm Depth . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 280mm Net Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . *Subject to change without notice. - 24 - ENGLISH CONNECTIONS MIC IN IN R L L TAPE OUT CD OUT TAPE+CD OUT L MPX FILTER ON OFF CD DIGITAL OUT RC-5 IN REMOTE EXT IN RS232C FADER START CD TAPE R R OUT OUT CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN DANGER INVISIBLE LASER RADIATION WHEN OPEN AVOID DIRECT EXPOSURE TO BEAM or RC-5 AMPLIFIER DCC IN OUT IN TAPE OUT AUX TUNER CD PHONO L GND R CD-R (DCC/DAT) DIGITAL COAXIAL OPTICAL IN OUT IN OUT The RC-5 connections shown enable Marantz Professional cascade operation. CAUTION The TAPE + CD OUT should be connected to TAPE IN of the amplifier. [. . . ]