User manual MARANTZ PD5020D

[. . . ] R Model PD5020D User Guide Plasma Monitor Important Information Precautions Please read this manual carefully before using your Marantz plasma monitor and keep the manual handy for future reference. Warnings and Safety Precaution The Marantz plasma monitor is designed and manufactured to provide long, trouble-free service. Never use solvents such as alcohol or thinner to clean the panel surface. Although Marantz produces the plasma display panels with more than 99. 99 percent active cells, there may be some cells that do not produce light or remain lit. For operating safety and to avoid damage to the unit, read carefully and observe the following instructions. [. . . ] * The Picture ADJ and Fine Picture features are available only when the "Auto Picture" is off. Restoring the factory default settings Select "RESET" under the function menu. Note that this also restores other settings to the factory defaults except for Auto Picture. Function Settings Menu Setting the on-screen menu When using the monitor for presentations, etc. , the monitor can be set so that the input source, screen mode, etc. , do not appear. Example: Turning the on-screen menu mode off Press the PROCEED button on the remote control to display the MAIN MENU on the screen, then. . . Use the v and w buttons to select "FUNCTION", then press the PROCEED button. Use the v and w buttons to select "OSM". FUNCTION : ON :1 : OFF :3 : ON :1 OSM OSM ADJ. POWER MGT GRAY LEVEL CINEMA MODE RGB3 ADJ. The mode switches as follows each time the button is pressed: ON OFF FUNCTION : OFF :1 : OFF :3 : ON :1 or OSM OSM ADJ. POWER MGT GRAY LEVEL CINEMA MODE RGB3 ADJ. To delete the main menu, press the EXIT button once more. Information OSM modes ON . . . . . . . . . . . . . . . . . . . Restoring the factory default settings Select "RESET" under the function menu. Note that this also restores other settings to the factory defaults. 27 Adjusting the position of the menu display Use these operations to adjust the position of the menus that appear on the screen. Example: Adjusting the position of the menu display Press the PROCEED button on the remote control to display the MAIN MENU on the screen, then. . . Use the v and w buttons to select "FUNCTION", then press the PROCEED button. ADJ. buttons. FUNCTION : ON :2 : OFF :3 : ON :1 EXIT RETURN FUNCTION : ON :1 : OFF :3 : ON :1 OSM OSM ADJ. FUNCTION : ON :2 : OFF :3 : ON :1 POWER MGT GRAY LEVEL CINEMA MODE RGB3 ADJ. ADJ. EXIT RETURN OSM OSM ADJ. FUNCTION : ON :1 : OFF :3 : ON :1 POWER MGT GRAY LEVEL CINEMA MODE RGB3 ADJ. To delete the main menu, press the EXIT button once more. Information Adjusting the position of the menu display 1 4 7 2 5 8 3 6 9 The position can be set between 1 and 9. Restoring the factory default settings Select "RESET" under the function menu. Note that this also restores other settings to the factory defaults. 28 Setting the power management for computer images This energy-saving (power management) function automatically reduces the monitor's power consumption if no operation is performed for a certain amount of time. Example: Turning the power management function on Press the PROCEED button on the remote control to display the MAIN MENU on the screen, then. . . Use the v and w buttons to select "FUNCTION", then press the PROCEED button. Use the v and w buttons to select "POWER MGT". FUNCTION : ON :1 : OFF :3 : ON :1 Information Power management function * The power management function automatically reduces the monitor's power consumption if the computer's keyboard or mouse is not operated for a certain amount of time. This function can be used when using the monitor with a computer conforming to the VESA DPMS format. * If the computer's power is not turned on or if the computer and selector tuner are not properly connected, the system is set to the off state. * For instructions on using the computer's power management function, refer to the computer's operating instructions. Power management function and POWER/ STANDBY indicator The POWER/STANDBY indicator indicates the status of the power management function. Restoring the factory default settings Select "RESET" under the function menu. [. . . ] ITM Company ADDRESS 8, Lotissement Ben Hatadi, Alger, Algerie 47 A/75 St. Waverley, VIC 3149, Australia Taborstraße 95 / Ladestraße 1, Gebäude Hangartner, A-1200 Wien, Austria P. O. Box 237, 141, Government Avenue, Manama, Bahrein 1078, Ramjoy Mohanja Lane Asadgonj, Chittagong 4000, Bangladesh Brusselbaan 278, 9320 Erembodegem, Belgium Makedonia Blvd. 16, 1606 Sofia, Bulgaria 633 Granite Court, Pickering, Ontario No. 38 Yushan Road, ShiQiao, Pan Yu, Guang Dong, China P. O. [. . . ]