User manual MARANTZ PD4201D

[. . . ] Model PD4201 User Guide Plasma Monitor IMPORTANT SAFETY INSTRUCTIONS Read before operating equipment Read these instructions. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. Do not defeat the safety purpose of the polarized or grounding-type plug. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. [. . . ] Press the EXIT button to delete the pointer. To cancel the off timer: 1. The off timer is canceled. OFF TIMER 0 Note: After the power is turned off with the off timer . . . When you are leaving the room or do not plan to use the system for a long period of time, turn off the power to the monitor. 15 WIDE Operations Wide Screen Operation (manual) With this function, you can select one of seven screen sizes. The picture is expanded in the horizontal and vertical direction, maintaining the original proportions. The screen size switches as follows: NORMAL ANAMORPHIC STADIUM ZOOM 2. 35:1 14:9 UNDERSCAN Original image When a 720P or 1080I signal is input: ANAMORPHIC 2. 35:1 When displaying enhanced split screen: NORMAL ANAMORPHIC NORMAL size screen (4:3) Information is lost on both sides. The squeezed film image is expanded to fulfill the entire screen at a ratio of 2. 35:1. Black bands do not appear at the top and bottom but information is lost on the left and right margins. · This feature is available when the input signal is video, component (480I, 480P, 576I, 576P, 720P, 1080I) or RGB (525P or 625P signal from a scan converter). * If black bands appear on the top and bottom in the full size screen, select the 2. 35:1 size screen to fill the screen and avoid image retention. * The picture has the same size as video pictures with a 4 : 3 aspect ratio. ANAMORPHIC size screen The image is displayed at a 14:9 aspect ratio. * This feature is available when the input signal is video, component (480I, 480P, 576I, 576P) or RGB (525P or 625P signal from a scan converter). * Images compressed in the horizontal direction ("squeezed images") are expanded in the horizontal direction and displayed on the entire screen with correct linearity. (Normal images are expanded in the horizontal direction. ) STADIUM size screen UNDERSCAN size screen Set "UNDERSCAN" to "ON" in the "IMAGE ADJUST". In order to restore the entire image, select UNDERSCAN. Overscan Underscan The picture is expanded in the horizontal and vertical directions at different ratios. * Use this for watching normal video programs (4:3) with a wide screen. ZOOM size screen * Picture noise or black border may appear near the edge of screen depending on the connected component. * The continuous display in this screen size over a prolonged period of time may result in image retention. * When Macrovision signal is input, the brightness may change. Note: Do not allow 4:3 content to be displayed for extended periods of time without using gray bars. This can cause image retention. 16 Wide Screen Operation with Computer Signals Switch to the wide screen mode to expand the 4 : 3 image to fill the entire screen. The screen size switches as follows: NORMAL ANAMORPHIC ZOOM When displaying enhanced split screen: NORMAL ANAMORPHIC NORMAL size screen (4:3 or SXGA 5:4) Information Supported resolution See page 39, 42 and 45 for details on the display output of the various VESA signal standards supported by the monitor. When 852 (848) dot 480 line wide VGA* signals with a vertical frequency of 60 Hz and horizontal frequency of 31. 7 (31. 0) kHz are input Select an appropriate setting for RGB SELECT mode referring to the"Table of Signals Supported" on page 39, 42 and 45. [. . . ] We are trying our best to control the quality in order to reduce the number of defective pixels. It is almost impossible to have zero pixel defects, even using the most advanced technology. Therefore we have to note that the warranty does not cover the Plasma display panel for pixel defects. We appreciate your understanding. 37 Specifications: PD4201 Screen Size Aspect Ratio Resolution Pixel Pitch Signals Synchronization Range 36. 3 inches(H) 20. 3 inches(V) 921. 6 mm(H) 515. 3 mm(V) diagonal 42 inches 16 : 9 1024 pixels(H) 768 pixels(V) 0. 036 inches(H) 0. 027 inches(V) 0. 9 mm(H) 0. 671 mm(V) Horizontal : 15. 5 kHz to 110. 0 kHz (automatic : step scan) Vertical : 50. 0 Hz to 120. 0 Hz (automatic : step scan) RGB, NTSC (3. 58/4. 43), PAL (B, G, M, N), PAL60, SECAM, HD*1 , DVD*1 40. 2" (1022) 1. 59" (40. 4) 2. 31" (57. 6) 36. 3" (921. 6) 20. 3" (515. 3) Input Signals 24" (610) 3. 9" (98) Input Terminals PC/RGB Visual 1 (Analog) mini D-sub 15-pin 1 Video Visual 1 RCA 1 Visual 2 S-Video: DIN 4-pin 1 DVD/HD Visual 1 RCA-pin (Y, Cb/Pb, Cr/Pr) 1*1 Visual 2 RCA-pin (Y, Cb/Pb, Cr/Pr) 1*1 HDMI HDMI connector 2*2 Audio Stereo RCA 3 (Selectable) External Control D-sub 9-pin 1 (RS-232C) Remote In Mini jack 1 Remote Out Mini jack 1 Sound output 8 W+8 W at 6 ohm Power Supply AC100 V to 240 V 50 Hz/60 Hz Current Rating 4. 5 A (maximum) Power Consumption 285 W (typical) Dimensions 40. 2 inches(W) 24 inches(H) 3. 9 inches(D) 1022 mm(W) 610 mm(H) 98 mm(D) Weight 59. 5 lbs / 27 kg (without stand) Environmental Considerations Operating Temperature 0 °C to 35 °C / 32 °F to 95 °F Humidity 20 % to 80 % (no condensation) Storage Temperature -10 °C to 50 °C / 14 °F to 122 °F Humidity 10 % to 90 % (no condensation) Other Features Motion compensated 3D Scan Converter (NTSC, PAL, 480I, 576I, 525I, 625I, 1035I, 1080I), 2-3 pull down Converter (NTSC, 480I, 525I, 1035I, 1080I (60 Hz)), 2-2 pull down Converter (PAL, 576I, 625I, NTSC, 480I, 525I), Digital Zooming (100 % to 900 % Selectable), Self Diagnosis via RS232C, PDP Saver (PEAK BRIGHT, ORBITER, INVERSE, WHITE, SCREEN WIPER, SOFT FOCUS, etc. ), Color Temperature Select (high/middle/middle low/low, user has 4 memories), Auto Picture Adjust, Input Skip, Color Tune, Gamma Correction (4 modes), Plug and play (DDC1, DDC2b, HDMI: E-DDC), Enhanced Split Screen, etc. [. . . ]