User manual MARANTZ CDR310

[. . . ] Model CDR310 User Guide CD Recorder CLASS 1 LASER PRODUCT LUOKAN 1 LASERLAITE KLASS 1 LASERAPPARAT CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product. WARNING TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION: USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURE OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE. LASER SAFETY This unit employs a laser. Only a qualified service person should remove the cover or attempt to service this device, due to possible eye injury. Copyright Recording and playback of any material may require consent. For further information refer to the following US ordinances: · Copyright act of 1956 · Dramatic and Musical Performance Act 1958 · Performers Protection Acts 1963 and 1972 · any subsequent statutory enactments and orders i IMPORTANT SAFETY INSTRUCTIONS READ BEFORE OPERATING EQUIPMENT This product was designed and manufactured to meet strict quality and safety standards. [. . . ] ( P. 17) 1 While the recorder is stopped, press the MENU/STORE button. 2 Turn the JOG to select "Batt Type" and press the JOG. · At this time, the display shows "Loading". The recorder's BOOT process starts. 3 · The recorder stops when the BOOT process completes. Turn the JOG to select the type of battery, and press the JOG. 2 Slide the power switch to switch the power OFF. Display Alkaline NiCd NiMH Battery type Alkaline battery Optional Nickel-Cadmium battery Optional Nickel-Metal Hydride battery 4 Press the MENU/STORE button to register the settings. 13 ENGLISH Battery type settings Battery remaining indicator The recorder operates using commercially available AA size alkaline batteries, the optional Nickel-Cadmium battery, or the optional Nickel-Metal Hydride battery. During operation, the battery remaining indicator is as follows. Remaining indicator No display Display explanation Nothing is displayed when the AC adaptor is being used. Either replace the batteries with new ones, or recharge the rechargeable batteries. If the "Beep" setting in the menu are set to ON, the beep sound will be heard. If you continue recording while this indicator is flashing, recording/playback will stop, and the recorder will shut down. ENGLISH Flashing Notes If the battery type is not set correctly to match the type of battery being used, the battery remaining display may not be displayed correctly. 14 Set the current time (year, month, date, hour, minute). Notes The setting order is different depending on the "DateForm" settings in the menu. ( P. 16) DateForm M (Month) / D (Date) / Y (Year) D (Date) / M (Month) / Y (Year) Y (Year) / M (Month) / D (Date) Setting order Month/Date/Year/Hour/Minute Date/Month/Year/Hour/Minute Year/Month/Date/Hour/Minute Turn the JOG to select [Year (2006 to 2099)], and press the JOG. 6 Turn the JOG to select [Time], and press the JOG. For 24 hour display : 0 ~ 23 For 12 hour display : 0am ~ 11pm < When DateForm: M/D/Y > 1 While the recorder is stopped, press the MENU/STORE button. 7 2 Turn the JOG to select "Date/time" and press the JOG. Turn the JOG to select [Minute (00 to 59)], and press the JOG. 3 Turn the JOG to select [Month (Jan to Dec)], and press the JOG. 8 Press the MENU/STORE button to register the settings. 4 Turn the JOG to select [Date (01 to 31)], and press the JOG. 15 ENGLISH Setting the clock 5 Date form settings There are 3 types of date form. You can set the form to your own preference. Form type M/D/Y D/M/Y Y/M/D Form subjects Month/Date/Year Date/Month/Year Year/Month/Date Form example Jan 10 2006 10 Jan 2006 2006 Jan 10 Time form settings There are 2 types of time form. You can set the form to your own preference. Form type 12H 24H Form subjects AM/PM display 24 hour display Form example 01 : 00 : 00 pm 13 : 00 : 00 ENGLISH < Default value > 24H < Default value > D/M/Y 1 1 While the recorder is stopped, press the MENU/STORE button. While the recorder is stopped, press the MENU/STORE button. 2 2 Turn the JOG to select "Date Form" and press the JOG. Turn the JOG to select "Time Form" and press the JOG. 3 3 Turn the JOG to select the type of date form, and press the JOG. Turn the JOG to select the type of time form, and press the JOG. 4 4 Press the MENU/STORE button to register the settings. Press the MENU/STORE button to register the settings. 16 Menu Settings The recorder uses 8 menus to set the various functions. There is a menu for basic settings such as time (display method), alarm, automatic power off, and battery type, and a menu for formatting the internal HD. These menus are displayed by pressing the MENU/STORE button once to enter the menu mode. You can also perform detailed settings for the recording and playback conditions, and register up to 3 of these settings in the preset menu. To enter this preset menu, select "PRESET" using the JOG, then specify the preset number. ( P. 18) Menu mode MENU/STORE Button First level Preset 1 Second level Input Date/Time 2 RecFormat 3 Format HD CD Split Default The composition of these menu contents is explained below. Menu Preset Menu explanation 3 settings can be registered. 2006-2099 JAN - DEC 1 - 31 0:00 - 23:59, (AM/PM 0:00 - 11:59) M (Month) / D (Date) / Y (Year), D/M/Y, Y/M/D, 12H, 24H On/Off On/Off Time : 5/10/15/30 min Alkaline, NiCd, NiMH (Execute) Settings Default settings Preset-1 2006 JAN 1 0:00 (0:00) D/M/Y 24H On Off 15 min Alkaline - Date/Time ( P. 15) Date Form ( P. 16) Time Form ( P. 16) Beep ( P. 41) A. PowOff ( P. 41) Batt_Type ( P. 13) Format HD ( P. 21) Sets the clock (current date and time). Selects the type of date form. Formats the HD. 17 ENGLISH Preset menu You can store to 3 detailed preset on the recorder for such settings as recording input, recording format, playback mode, remote control, etc. There are 17 setting items in the preset menu, and 3 presets can be set with the desired conditions. Preset1 : High quality PCM recording Preset2 : Meeting recording (monaural) Preset3 : MP3 music recording Default settings Preset1 MIC Stereo CD-DA Preset2 MIC Mono MP3 Preset3 MIC Stereo MP3 ENGLISH Preset menu Input ( P. 22) RecFormat ( P. 23) CD Split ( P. 36) PreRecord ( P. 29) Rec Level ( P. 25) MIC-ATT-L ( P. 27) MIC-ATT-R ( P. 27) IntMicATT ( P. 27) Phantom ( P. 28) BkGrndRec ( P. 30) SilentSkp ( P. 31) ManualTR ( P. 32) Auto TRK ( P. 33) Play Mode ( P. 39) StopMonit ( P. 44) Remote ( P. 45) Default ( P. 46) Menu explanation Selects the input source. MIC, Dig-In Stereo, Mono CD-DA, WAVE, MP3, AIFF When burning HD data to CD-R, this sets the saving procedure for the final track On/Off when all of the contents will not fit onto one CD-R. Off/1-10 sec (1 sec steps) Manual/ALC On On On Off Manual Off 4 sec Manual Off 4 sec Manual Off External microphone Sets the attenuator function for the left On/Off channel side. [. . . ] RC600PMD Carrying case . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . PRC310 Attache carrying case . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . CA200 · Specifications are subject to change without notice. 49 ENGLISH Outputs LIMITED WARRANTY Your Marantz Professional product is warranted against manufacturer defects in material and workmanship for a period of one year parts and labor. Except as specified below, this warranty covers defects in material and workmanship. Damage, deterioration, malfunction or failure to meet performance specifications resulting from: a) Accidents, acts of nature, misuse, abuse, neglect or unauthorized product modification. b) Improper installation, removal or maintenance, or failure to follow supplied instructions. [. . . ]