User manual MARANTZ CD5004

[. . . ] Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. Do not defeat the safety purpose of the polarized or grounding-type plug. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. [. . . ] The Play indicator “1” lights and normal playback is resumed. € If you press [RANDOM] during AMS playback, the AMS playback mode is canceled and random playback starts. Indd 11 2010/05/28 15:42:08 ENGLISH Getting started Getting started Advanced connections Preparations Connecting cables Select the cables according to the equipment being connected. Digital connections CD recorder / MD recorder AUDIO OPTICAL IN COAXIAL IN Remote control connection When you use this unit connected to a Marantz amplifier, this unit receives operation signals sent from the amplifier and operates accordingly. Basic connections Basic connections Audio cables Optical digital connections n Connection Use the supplied remote connection cable to connect the REMOTE CONTROL IN terminal of this unit to REMOTE CONTROL OUT terminal of the amplifier. Basic operation Basic operation Optical cable (sold separately) Coaxial digital connections n Setting Set the remote control switch on the rear panel of this unit to “EXTERNAL” to use this feature. • This setting will disable remote sensor reception of this unit. € To operate the unit, point the remote control at the remote sensor of the amplifier. Advanced connections Advanced connections Advanced connections Coaxial digital cable (sold separately) Remote control connection When connecting the optical digital output connector with an optical transmission cable (sold separately) To use this unit without connecting it to the amplifier, set the remote control switch to “INTERNAL”. The unit Advanced operations Advanced operations Remote connector cord (supplied) Explanation of terms Explanation of terms Match the shapes then insert firmly. Indd 12 2010/05/28 15:42:08 ENGLISH Advanced operations Symbols used to indicate buttons in this manual Button located on both the main unit and the remote control Button only on the main unit Button only on the remote control BUTTON <BUTTON> [BUTTON] Playing tracks in a specific order (Program playback) Checking the order of the programmed tracks Press [SCROLL/RECALL]. € During program playback: Displays the track numbers in the programmed order. € During delete program playback: Displays the deleted track numbers in the deleted order. € “Program” appears on the display and the program playback mode starts. € When the “PROG” indicator flashes, select tracks that you want to add for program playback. <7 / 9> 1 Use [NUMBER] (0 – , 2 7/9> to select9)the[8 , 9] or <8/6 , tracks you want to program. GExampleH To program tracks 3 and 12 to be played in that order, press [3], [1], and [2] one after the other. Canceling a track from program playback While stopped, press [SCROLL/RECALL]. Press [SCROLL/RECALL] to display the track that you want to delete and press [CANCEL]. To enter a two-digit number, be sure to press the two number buttons, one immediately after the other. [SOUND MODE] [CANCEL] [PROGRAM] [DISPLAY] [PITCH –, +] [PITCH RESET] [REPEAT] 3 1 [NUMBER] (0 – 9) [MENU] [SCROLL/RECALL] Playback with unwanted tracks skipped (Delete program playback) 1 After pressing [PROGRAM] during stop mode, press [CANCEL]. € You can specify up to 30 tracks each for program playback and delete program playback. [. . . ] In CD recorders, the task of writing TOC information is referred to as finalizing the disc. Discs that are not finalized cannot be properly recognized as an Audio CD and played back by regular CD players and Super Audio CD players. For details, please read the instruction manual provided with a CD recorder. *TOC stands for Table Of Contents and contains information such as the total number of tracks and total playing time of the disc. [. . . ]