User manual MARANTZ CC4003

[. . . ] 17 1:18:51 PM CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product. IMPORTANT SAFETY INSTRUCTIONS READ BEFORE OPERATING EQUIPMENT This product was designed and manufactured to meet strict quality and safety standards. There are, however, some installation and operation precautions which you should be particularly aware of. [. . . ] To change disc 5, press DISC SKIP button on the unit or DISC 3 or 4 button on the remote controller to rotate the turntable on the tray, then change the disc. €¢ After changing the disc, make sure to press 0 button to close the disc tray. nAMES AND FUNCTIONS BASIC OPERATIONS ENGLISH BASIC OPERATIONS ADVANCED CONNECTIONS PLAYING YOUR FAVORITE PARTS OF A TRACK CONNECTING TO A DIGITAL AUDIO COMPONENT The unit has one digital optical output connector and one digital coaxial output connector. You can enjoy digital recording when the unit is connected to a CD recorder or other digital recording component. nAMES AND FUNCTIONS BASIC CONNECTIONS BASIC BASIC OPERATIONS OPERATIONS ADVANCED ADVANCED CONNECTIONS CONNECTIONS ADVANCED OPERATIONS TROUBLESHOOTING OTHERS PLAYING YOUR FAVORITE TRACKS OF A DISC 1. REMOTE CONTROL CONNECTION Connecting this unit to additional Marantz audio equipment using the supplied remote control connecting cable enables remote control of the connected equipment as a single audio system. €¢ When connecting equipment incorporating a remote sensor, connect the “remote control out” connector of the equipment to the “remote control in” jack of the unit. When doing this, set this unit’s switch to “EXTERNAL. € This will stop its remote control IR receiver from operating and the unit can now be controlled via the remote control IR receiver of the attached equipment. Hold 1 , ¡ button on the remote controller or 4/1, ¡/¢ button on the unit while playing to search the part to play. cONNECTING THE OPTICAL/COAXIAL OUTPUT CONNECTORS Use an optical/coaxial digital connecting cable available on the market. Insert the plug of the optical digital connecting cable firmly in until it clicks into place. Press DISC1-5 button on the unit or remote controller to choose the disc to play. €¢ At this time the first track of the chosen disc is played. coaxial digital connecting cable (available on market) or Optical digital connecting cable (available on market) Remote control connecting cable (supplied) : Signal flow 2. Press 4/1, ¡/¢ button on the unit, or 4, ¢ or 0-9 button on the remote controller to choose the track number to play. iNPUT ANALOG IN/OUT L DIGITAL IN/OUT COAXIAL OPTICAL REMOTE CONTROL IN REMOTE CONTROL IN R OUTPUT OUT INPUT OUTPUT INPUT OUTPUT EXTERNAL INTERNAL OUT (example) • To choose the 9th track:Press 9. €¢ To choose the 23rd track: Press 2, and within 1 seconds press 3. €¢ To choose the 123rd track: Press 1, within 1 seconds press 2, and within 1 seconds press 3. 17 1:19:13 PM ENGLISH CONNECTING OTHER EQUIPMENT REMOTE CONTROL ANALOG OUT DIGITAL OUT FLASHER IN IN EXTERNAL INTERNAL RS 232C RS-232C OUT R COAXIAL OPTICAL L SWITCHING PLAYING TIME DISPLAY REPEAT PLAY Repeat play is a function to automatically play repeatedly. Light up TIME REPEAT After choosing a disc to repeat, press REPEAT button on the unit or remote controller twice to play the tracks of the chosen disc repeatedly. €¢ At this time, “REPEAT 1 DISC” lights up. [. . . ] 6 W This unit’s specifications and exterior are subject to change without notice for improvements. 0 kg 12 (1/2) TROUBLESHOOTING 104 (4-1/8) 116 (4-5/8) POWER SUPPLY 5 (1/4) SIGNAL SYSTEM ADVANCED OPERATIONS ADVANCED CONNECTIONS BASIC OPERATIONS BASIC CONNECTIONS NAMES AND FUNCTIONS OTHERS ENGLISH OTHERS NAMES AND FUNCTIONS BASIC CONNECTIONS BASIC OPERATIONS ADVANCED CONNECTIONS ADVANCED OPERATIONS TROUBLESHOOTING OTHERS OTHERS NOTES ABOUT THE DISCS * Handle the discs carefully so as not to scratch their signal surfaces. When cleaning the signal surfaces of discs, always be sure to use the special cleaner and wipe the surfaces in the directions shown in the figure below. Do not attempt to play heart-shaped or octagonal discs or discs with any other special shapes. [. . . ]