User manual MARANTZ BD7004

[. . . ] BD7004 ENGLISH DEUTSCH FRANÇAIS ITALIANO ESPAÑOL NEDERLANDS SVENSKA SAFETY PRECAUTIONS RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION IMPORTANT SAFETY INSTRUCTIONS 1. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. [. . . ] · To clear a marker, use [ / ] to select the marker number to be cleared and press [CLEAR]. · For BD-Video and AVCHD, marker search between different titles is not available. · For BD and AVCHD, you can return to the maker only during playback. Function Setup Note · If the "Angle Icon" setting is "Off" in the "Others" menu, will not appear. Refer to page 37. Search Others Using H / G 1) Press G to skip to the next chapter, track or file during playback. To go back to the previous chapter, track or file, press H twice in quick successions. Note · During programme and random playback, search functions are not available except the search using H / G. · Time search function is available only in the same track, file or title. · For BD and AVCHD, chapter and time search are available only during playback. Note · If title contains no chapters, H / G changes the title. 22 ENGLISH ENGLISH Playback Playback [TOP MENU] [ / / / ] [POP UP MENU / MENU] [ENTER] WMA OFF (File information (elapsed time)) A File name information A Tag information (title name) A Tag information (artist name) A OFF (File information (elapsed time)) Bit rate information Introduction Connections Playback Function Setup Others 9 A 10 B L1 [SUBTITLE] [DISPLAY] [AUDIO] JPEG OFF A File information A File name information A OFF On-Screen Display You can check information about the current disc by pressing [DISPLAY]. Depending on the media, available information varies. Chapter information <For VR mode DVD-RW/-R> 1 2 3 B 45 11 A ORG 2/5 0:00:00 A BD-V AVCHD OFF A Title/Chapter information A Title information (elapsed time) A Title information (remaining time) A HDMI information A OFF <Title / Chapter information for BD/AVCHD> 6 1 2/5 I Bit rate (the amount of video data currently being read) J Layer number (Only for 2-layered discs) (L0: Layer 0 is played back. L1: Layer 1 is played back) K Type of title (ORG: original, PL: playlist) DVD-V DVD-VR OFF A Chapter information (elapsed time) A Chapter information (remaining time) A Title information (elapsed time) A Title information (remaining time) A Bit rate information A HDMI information A OFF Track/File information 12 A Current chapter number/total number of chapters B Elapsed time/remaining time of the current chapter C Current repeat setting (Only when repeat setting is active) (C: Chapter repeat, T: Title repeat, AB : A-B repeat) D Indicates that the multi camera angle images are available on the scene E Current playback status F Current title number 13 14 15 T CD OFF (Track information (elapsed time)) A Track information (remaining time) A Disc information* (elapsed time) A Disc information* (remaining time) A OFF (Track information (elapsed time)) (* not available during the programme/random playback) 2/5 0:00:00 SD DivX® OFF A File information (elapsed time) A File information (remaining time) A File name information A HDMI information A OFF L M N O Current track (file) number/total number of track (file) Elapsed time/remaining time of the current track (file) Indication of SD Memory Card playback Current repeat setting (Only when repeat setting is active) (T: Track/file repeat, G: Group repeat, A: All repeat) Title information Disc information 7 8 MP3 OFF (File information (elapsed time)) A File name information A OFF (File information (elapsed time)) 16 17 A 1/10 0:04:00 1/10 0:04:00 G Current title number/total number of titles H Elapsed time/remaining time of the current title P Current track number/Total number of tracks Q Elapsed time/remaining time of the current disc 23 ENGLISH ENGLISH Playback Playback File name information HDMI information DVD-V DVD-VR 21 22 / 1080i CD AVCHD DivX® Introduction 18 Video Info 1) During playback, press [AUDIO]. 2) Use [ / ] to select your desired audio stream/channel. : YCbCr : 6ch MP3 MUSIC Audio Info Max Channel : Dolby Digital 23 24 1 ENG Dolby D 3/2. 1ch 48k /4 · For audio CD, you can select following options. "Stereo" : Both right and left channels are active (stereo) "L-ch" : Only left channel is active "R-ch" : Only right channel is active 3) Press [AUDIO] to exit. R Media icon and File name : DivX file : Windows MediaTM Audio file ® : MP3 file : JPEG file U V W X Connections HDMI video format Resolution of the HDMI output image HDMI audio format Maximum numbers of audio channels that can be accepted by the connected device Note · For VR mode DVD-RW/-R with MTS (Multi-channel Television Sound) system, you can switch between "1. Main" (main audio), "1. Sub" (sub audio), and "1. Main/Sub" (main and sub audio). · For some BD, secondary audio will be output even when subpicture is off. · The sound mode cannot be changed during playback of discs not recorded in multiple sound. · Some discs allow to change audio language setting on the disc menu. Refer to the manual accompanying the disc. ) · Pressing [AUDIO] may not work on some discs with multiple audio Streams/Channels (e. g. · If you choose a language that has a 3-letter-language code, the code will be displayed every time you change the Audio Language setting. If you choose any other Languages, "---" will be displayed instead (refer to page 48). · Audio Language selection cannot be made during dialogue speed (refer to page 19). · If the disc has no audio language, "Not Available" will be displayed. · For discs with DivX® files, only MP3, MP2 or Dolby Digital audio is displayed. · For DTS-CD (5. 1 music disc), "DTS" will be displayed. [. . . ] (Check the status of the HDMI related indications. ) - Check the RCA audio/video cable connections. - Check if the pure direct mode is set to "VideoOff" or "All Off". If it is the case, set it to "Disp. Off" or "Normal". - Check whether the connected display device or other device supports HDCP. [. . . ]