User manual MARANTZ 74 CD-67 SERVICE MANUAL

[. . . ] However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by tuning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. NOTE: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. LASER SAFETY This unit employs a laser. [. . . ] The same number of tracks as the number of times the button is pressed can be skipped in the reverse direction. When the button is held down, tracks are searched (fast backward). n Display This shows the settings, play status, text information, etc. m TIME button Switches the time shown on the display to the remaining time of the current track or the remaining time of the entire disc. With a CD-TEXT disc, this switch is also used to switch the displayed information from the text display mode to the time display mode. ¢ /5 ¡/¢ (search forward/next track) button The same number of tracks as the number of times the button is pressed are skipped in the forward direction. When the button is held down, tracks are searched (fast forward). , EDIT button Press to engage the editing function, which helps record a disc onto a tape by playing the tracks according to the tape length and leaving a nonrecorded blank of 4 seconds between every track. /6 PHONES jack The headphones are connected to this jack. Use headphones that come with a standard plug. /7 PHONES LEVEL control This is used to adjust the headphones volume level. The level increases when it is turned clockwise. 8 NAMES AND FUNCTIONS cde DISC f TTL gh RNDM TRK i j kl m PROG A­ B RPT 1 PITCH nopq EDIT PEAK TTL TIME TEXT 12 34 56 78 9 10 11 12 13 14 15 16 17 18 19 20 ab r a Main display This displays the time information and text information of the disc played, the setting menus, etc. k RPT (repeat) indicator This lights during repeat play. l 1 (1-track repeat) indicator b TEXT indicator This lights when a disc supporting CD-TEXT has been loaded. This lights during 1-track repeat play. m PITCH (pitch control) indicator Lights up when the pitch control function is set and active. c 8 (pause) indicator This lights when play is temporarily suspended. n EDIT indicator This lights during edit mode. d 3 (play) indicator This lights during play. o PEAK indicator This lights during peak search and playback of the peak. e DISC indicator This flashes during readout of the table of contents (TOC) information on the disc. p TTL (total time) indicator When the total remaining time or total program time is displayed, this lights above that display. f TTL (total track) indicator This lights above the display of the total number of tracks recorded on the disc. q TIME indicator This lights while the elapsed time or other such time is displayed. g RNDM (random) indicator This lights during random play. r 1 - 20, (music calendar) h TRK (track) indicator This lights above the display of the number of the track being played, etc. This displays the track numbers recorded on the disc, the track numbers still to be played, and the track numbers programmed for program play. i PROG (program) indicator This lights during program play. j A-B (A-B repeat) indicator This lights during A-B repeat play. 9 ENGLISH Display NAMES AND FUNCTIONS Remote control unit i 1, ¡ (search) buttons 1 : This button is used to search backward when it is held down during play. ¡ : This button is used to search forward when it is held down during play. ENGLISH DISPLAY POWER q 1 2 5 8 0 RANDOM QUICK REPLAY !2 3 6 9 CANCEL o PITCH -/RESET/+ (pitch control down/reset/ up) buttons These are used to adjust the play speed (pitch) with a ± 12 step. w 4 7 PROGRAM !0 AMS (auto music scan) button !3 !4 !5 This is used to play the intros of all the tracks in sequence starting from the first track for the duration equivalent to the setting. e r t y u i !1 TEXT button This is used to switch the main display from the time display to the text display. PITCH RESET !2 POWER button REPEAT o !0 !1 AMS A-B SCROLL/ RECALL TEXT TIME !6 !7 !8 !9 This is used to switch the player's power ON and STANDBY. !3 CANCEL button This is used to cancel the programmed tracks. !4 QUICK REPLAY button REMOTE CONTROLLER RC5400CD Press the button to return to the position 10 seconds before the current playback position and restarts playback from there. !5 4, ¢ (track skip) buttons q DISPLAY button This is used to turn off the display (DISPLAY OFF mode). 4 : Use this to return to the start of the track now playing or return to the start of the previous track. ¢ : Use this to advance to the start of the subsequent track. w Numeric buttons (0 to 9) These are used to specify the numbers of the tracks to be played. !6 REPEAT button This is used to play one track or all the tracks on the disc repeatedly. e PROGRAM button This is pressed to initiate program play. !7 A-B (A-B repeat) button This is used to set start point (A) and end point (B) when a particular section is to be played repeatedly. r RANDOM button This is used to play the tracks in a random sequence. t 3 (play) button This is used to start play. !8 TIME button This switches the main display from the text display to the time display. It can display how much time has elapsed and how much play time remains for the current track as well as how much play time remains for the whole disc. y 8 (pause) button This is used to temporarily suspend play. u 7 (stop) button This is used to stop the play. !9 SCROLL/RECALL button This is used to scroll the text display when text is displayed. Once the number of the track is selected, play will start automatically. Example: To play track 3 Press the "3" numeric button. DISPLAY POWER · Playing a previous or subsequent track (track skip) Advancing to a subsequent track 1 2 3 Press the ¡/¢ button on the player or ¢ button on the remote control unit for the number of times equivalent to the number of tracks through which play is to be advanced. Example: To play track 12 Press the "1" numeric button. DISPLAY POWER Returning to the start of the track now playing or a previous track 1 2 3 Within 1. 5 second, press the "2" numeric button. DISPLAY POWER When the 4/1 button on the player or 4 button on the remote control unit is pressed, play returns to the start of the track now playing. Play returns to the previous track which is equivalent to the number of times the button was pressed. 1 2 3 13 ENGLISH Playing a specific track BASIC OPERATIONS Playing a specific part of a specific track · Searching a specific part of a track (search) While listening to a track being played, it is possible to search a specific part of that track by a forward or backward search. ENGLISH · Playing the last 10 seconds again during play (quick replay) PROGRAM CANCEL Forward searching through the track now playing 0 RANDOM QUICK REPLAY When the QUICK REPLAY button on the remote control unit is pressed during play, play will be returned by 10 seconds, and the same section will be played again. The search (forward search) mode is established by holding down the ¡/¢ button on the player or ¡ button on the remote control unit. Holding down the button initiates a forward search. Backward searching through the track now playing The search (backward search) mode is established by holding down the 4/1 button on the player or 1 button on the remote control unit. ADVANCED OPERATIONS ENGLISH Repeat play (playing the same tracks repeatedly) · Playing all tracks repeatedly (all-track repeat) This function repeatedly plays all the tracks. Press the REPEAT button on the remote control unit. PITCH RESET PITCH RESET · Playing a specific part repeatedly (A-B repeat) This function repeatedly plays a specific part of a track that you want to hear. 1. During play, press the A-B button on the remote control unit at the start point of the part to be repeated. AMS A-B REPEAT AMS A-B REPEAT The "RPT" indicator on the display lights, and the repeat play of all the tracks starts. Light up TTL TRK RPT TIME The "A-" indicator on the display now lights. Display example: A-B repeat , point A (start), track 1, 5 sec. Light up 12 34 56 78 9 10 11 12 13 14 15 16 17 18 TTL TRK A­ TIME To stop all-track repeat play and resume normal play, press the REPEAT button on the remote control unit twice. The "RPT" indicator on the display goes off. 12 34 56 78 9 10 11 12 13 14 15 16 17 18 2. · Playing one track repeatedly (1-track repeat) This function repeatedly plays one track only. Even during random play or program play, it repeats the track being played. Press the REPEAT button on the remote control unit twice while the track to be repeated is playing. PITCH RESET Press the A-B button on the remote control unit at the end point of the part to be repeated. PITCH RESET AMS A-B REPEAT AMS A-B REPEAT The "A-B" indicator on the display now lights, and the designated part (from point A to point B) is played repeatedly. [. . . ] SPECIFICATIONS AND DIMENSIONS ENGLISH Specifications Audio characteristics Channels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 Hz to 20 kHz Dynamic range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100 dB Signal-to-noise ratio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100 dB (1 kHz) Harmonic distortion . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]