User manual MAPPY ITI 390ND

[. . . ] 2°) Réception d’un signal GPS To capture this information, your GPS must be outdoors or behind glass. € If you are in a building, in a tunnel, or underground, you cannot receive GPS signals. € If your vehicle has an athermic windshield, your reception may be impaired. [. . . ] Warning: Install the car holder where it does not interfere with driving, obstruct the driver's vision, or deploy the airbags. 8 Next, click on "Address” Enter the name or postal code for the Town, and then select your destination in the list of results. (optional) Enter the name of your destination street name, and then select the street you want. Click on "OK” and Go Wait a few moments for your mappyiti 390ND to receive the GPS signal, and then let it guide you. 14 6°) Turning your mappy iti 390ND on/off Stylus Power and Standby button Turning on your device To turn on the device, hold down the power button for a few seconds (about 3 seconds) Turning off your device To power off the device, hold down the button for a few seconds (about 5 seconds). You have two options for turning off your device: putting it in standby mode (when you turn on the device, it will restart at the same location) or powering it off completely (the device will completely restart). Note: When charging the battery, you can only put your device in standby mode, even if you click on the Off button. Number of seconds remaining before the device goes into automatic standby mode. For standby mode The power down the device 15 7°) The first free map update Terms and Conditions : For 30 days after activating your GPS on mappyPlus, you may update mappy maps for FREE. Connect your GPS with the provided cable Wait for the software to recognize your GPS and for the server to finish analyzing the contents of your mappy GPS 4. Log in and then go to "My Products", located on the left menu bar Once the Ready to be installed" message appears, click on "Synchronize". Warning: You are strongly advised to back up your mappy GPS before starting the installation. 16 8°) Save the file Important: It is advisable to make a backup of your memory in case of data loss, so you can recover the original content in order to avoid intervention service. € Connect your GPS mappyiti 390ND to your computer via the supplied USB cable. Then check if the equipment is recognized on the user’s computer as a Removable Disk. Make a copy and paste the entire contents of removable disk to your computer. € 17 9°) Warranty coverage The manufacturer guarantees that this product is free of assembly and material defects under normal conditions of use. The certificate of warranty and the invoice, indicating the date on which the device was purchased, are proof of warranty. [. . . ] The customer should save all of their data and erase any information from the device that may be considered to be confidential, personal, or relating to intellectual property. The manufacturer is not responsible for damage or loss of any software or data saved on a device that is sent to customer service for repair. Restrictions The manufacturer accepts no responsibility if, upon receipt of the product for repair, texts and examinations of the device reveal that the alleged defect or malfunction does not exist or that it was caused by the customer or a third party, particularly in the following situations: breakage, misuse, negligence, improper maintenance, unauthorized attempts to open, repair, or modify the product, incorrect installation or use of software added by the user, a virus, or any cause unrelated to its originally intended use, an accident, fire, lightning, short circuits, power outage, or any other incident, exposure to moisture, or exposure to excessive temperatures. [. . . ]