User manual MAMIYA 645AFD

[. . . ] Mamiya 645 AFD Instruction Manual Companion for Digital Photography Mamiya 645 AFD Instruction Manual Companion for Digital Photography Congratulations on your purchase of the Mamiya 645AFD. To make the transition from film to digital easier, we are including this digital companion that explains all of the new indicators you will see on the LCDs of your Mamiya 645AFD. [. . . ] They will be displayed on the Mamiya 645 AFD's internal and external LCDs. Some digital backs will not display some or any of the following information. This will depend on the digital back manufacturer's design. Condition #1 This display will appear before the shutter has been released (Normal mode). At this point the Mamiya 645AFD will act as if there is a film magazine attached and will display shutter speed and aperture respectively. Condition #2 This will appear under normal shooting conditions after the shutter has been released (Capture mode). CaP db tells us the digital back is in the process of capturing an image. It will be displayed until the digital capture is complete except under conditions 4b, 5 and 6. Condition #3 After the CaP db display these indicators may appear (After Capture mode). The +1. 3 confirms the meter reading is +1. 3 stops higher than the set exposure on the camera. If the exposure setting set on the camera does not agree with the exposure determined by the meter, this will be displayed showing the difference between the two. It can be cancelled by pressing any button. Internal LCD External LCD Condition #4 After CaP db is displayed these indicators may appear (After Capture mode). It confirms the digital back is storing an image and that there are certain number of frames left in the memory of the digital back. This indicator shows the remaining frames left by displaying Stor 88 (where 88 is a number between 99 and 1). This display will blink for 3 seconds and can be cancelled by pressing any button. [. . . ] Condition #7 If the digital back is connected to the Mamiya 645AFD and the connection to the host computer is not installed, this will be displayed when the shutter release is pressed. This will also appear under the previous three conditions when the shutter release is pressed. Internal LCD External LCD M A M I YA A M E R I C A C O R P O R AT I O N 8 Westchester Plaza, Elmsford, NY 10523 Phone: (914) 347-3300 · Fax: (914) 347-3309 E-mail: info@mamiya. com [. . . ]