User manual MAKITA LS1016F

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual MAKITA LS1016F. We hope that this MAKITA LS1016F user guide will be useful to you.


MAKITA LS1016F : Download the complete user guide (2263 Ko)

You may also download the following manuals related to this product:

   MAKITA LS1016F DATASHEET (120 ko)
   MAKITA LS1016F ANNEXE 73 (2225 ko)
   MAKITA LS1016F ANNEXE 981 (2225 ko)
   MAKITA LS1016F ANNEXE 874 (2225 ko)
   MAKITA LS1016F ANNEXE 460 (2225 ko)
   MAKITA LS1016F ANNEXE 333 (2225 ko)
   MAKITA LS1016F ANNEXE 588 (2225 ko)
   MAKITA LS1016F ANNEXE 817 (2225 ko)
   MAKITA LS1016F ANNEXE 113 (2225 ko)
   MAKITA LS1016F PARTS LIST (1004 ko)
   MAKITA LS1016F ANNEXE 788 (2225 ko)

Manual abstract: user guide MAKITA LS1016F

Detailed instructions for use are in the User's Guide.

[. . . ] To avoid injury from flying debris, keep holding the saw head down, after making cuts, until the blade has come to a complete stop. When performing slide cut, first pull carriage fully and press down handle, then push carriage toward the guide fence. Do not dispose of electric equipment together with household waste material!In observance of European Directive 2002/96/EC on waste electrical and electronic equipment and its implementation in accordance with national law, electric equipment that have reached the end of their life must be collected separately and returned to an environmentally compatible recycling facility. [. . . ] When bevel-cutting operations are complete, don't forget to return the upper fences to the original position and return it. The use of the dust bag makes cutting operations cleaner and dust collection easier. When the dust bag is about half full, remove the dust bag from the tool and pull the fastener out. Empty the dust bag of its contents, tapping it lightly so as to remove particles adhering to the insides which might hamper further collection. nOTE: · If you connect a vacuum cleaner to your saw, cleaner operations can be performed. To empty the dust box, open the cover by pushing the button and dispose of the sawdust. Dust box can easily be removed by pulling it out while turning it near the dust nozzle on the tool. nOTE: · If you connect a Makita vacuum cleaner to this tool, cleaner operations can be performed. nOTICE: · Empty the dust box before collected sawdust level reaches the cylinder section. The vertical vise can be installed in two positions on either the left or right side of the base. If the screw to secure the vise arm contacts the carriage, install the screw on the opposite side of vise arm. Make sure that no part of the tool contacts the vise when lowering the handle fully and pulling or pushing the carriage all the way. position the workpiece at the desired cutting position and secure it firmly by tightening the vise knob. Turning the vise knob to 90° counterclockwise allows the vise knob to be moved up and down, facilitating the quick setting of workpiece. wARNING: · The workpiece must be secured firmly against the turn base and guide fence with the vise during all operations. If the workpiece is not properly secured against the fence the material may move during the cutting operation causing possible damage to the blade, causing the material to be thrown and loss of control resulting in serious personal injury. Before use, be sure to release the handle from the lowered position by pulling the stopper pin. ⷠDo not apply excessive pressure on the handle when cutting. Too much force may result in overload of the motor and/or decreased cutting efficiency. Push down handle with only as much force as is necessary for smooth cutting and without significant decrease in blade speed. If the handle is pressed down with force or if lateral force is applied, the blade will vibrate and leave a mark (saw mark) in the workpiece and the precision of the cut will be impaired. ⷠDuring a slide cut, gently push the carriage toward the guide fence without stopping. [. . . ] Have the tool repaired by a Makita authorized service center for any failure on the laser unit. These accessories or attachments are recommended for use with your Makita tool specified in this manual. The use of any other accessories or attachments may result in serious personal injury. ⷠOnly use the Makita accessory or attachment for its stated purpose. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE MAKITA LS1016F




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual MAKITA LS1016F will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.