User manual MAKITA LB1200F

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual MAKITA LB1200F. We hope that this MAKITA LB1200F user guide will be useful to you.


MAKITA LB1200F : Download the complete user guide (2170 Ko)

Manual abstract: user guide MAKITA LB1200F

Detailed instructions for use are in the User's Guide.

[. . . ] When not in use, tools should be stored in a dry, high or locked up place, out of reach of children. It will do the job better and safer at the rate for which it was intended. Do not force small tools or attachments to do the job of a heavy duty tool. Do not use tools for purposes not intended; for example, do not use circular saws to cut tree limbs or logs. [. . . ] Once the leading edge of the securing plate spring fits into the machine's securing hole, the dust box is loaded. Fasten the guide rail with four each thumb screws and washers to the table. Push the upper position (I) of the switch for turning on the light and the lower position (O) for off. If the rip fence is on the left side of the blade, slide the guide rail to the left to adjust to 0 point. The push stick serves as an extension of the hand and protects against accidental contact with the saw blade. The push stick must always be used if the distance between band saw blade and a rip fence is less than 150 mm. 17) When the push stick is not used it can be stored on the push stick holder provided at the band saw frame. Contacting the band saw blade even with the band saw blade at standstill may cause a personal injury. Be sure to wear gloves when handling saw blade in situations such as removing from packaging, mounting or replacing blade. Observe correct position: the teeth point towards the front (door) side of the saw. Tighten quick release lever until blade does no longer slip off the band saw wheels. CAUTION: Close lower cover only when the lower blade guard is in its closed position. Then: - tension band saw blade (Refer to the section titled "Tensioning the band saw blade" in "FUNCTIONAL DESCRIPTION"). - align band saw blade (Refer to the section titled "Aligning the band saw blade" "ASSEMBLY"). - align blade guides (Refer to the section titled "Adjusting the upper blade guide" in "FUNCTIONAL DESCRIPTION"). - let saw test run for at least one minute; - stop saw unplug and recheck settings. Too little tension can cause the driven band saw wheel to slip and the band saw blade to stop. Using the scale as guide, and taking the blade width into consideration, turn the knob to adjust tension. Checking the blade tension: - check tension by pushing with a finger, halfway between table and upper blade guide, against the side of the blade (the blade should flex not more than 1-2 mm). The scale indicates the correct adjustment in dependence on the band saw blade width. Correct tension if necessary: - turning the setting knob clockwise increases the blade tension. If the band saw blade does not run in the center of the rubber tyres, the tracking needs to be corrected by adjusting the tilt of the upper band saw wheel: 1. [. . . ] 0123 The technical documentation is kept by our authorised representative in Europe who is: Makita International Europe Ltd. These accessories or attachments are recommended for use with your Makita tool specified in this manual. The use of any other accessories or attachments might present a risk of injury to persons. If you need any assistance for more details regarding these accessories, ask your local Makita Service Center. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE MAKITA LB1200F




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual MAKITA LB1200F will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.