User manual MAKITA KP312S

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual MAKITA KP312S. We hope that this MAKITA KP312S user guide will be useful to you.


MAKITA KP312S : Download the complete user guide (609 Ko)

You may also download the following manuals related to this product:

   MAKITA KP312S (320 ko)
   MAKITA KP312S (929 ko)
   MAKITA KP312S (929 ko)
   MAKITA KP312S (929 ko)
   MAKITA KP312S (926 ko)
   MAKITA KP312S (926 ko)
   MAKITA KP312S (926 ko)
   MAKITA KP312S ANNEXE 228 (926 ko)
   MAKITA KP312S ANNEXE 806 (926 ko)
   MAKITA KP312S ANNEXE 631 (926 ko)
   MAKITA KP312S ANNEXE 239 (926 ko)
   MAKITA KP312S ANNEXE 766 (926 ko)
   MAKITA KP312S ANNEXE 703 (926 ko)
   MAKITA KP312S ANNEXE 503 (926 ko)
   MAKITA KP312S ANNEXE 147 (926 ko)
   MAKITA KP312S ANNEXE 308 (926 ko)

Manual abstract: user guide MAKITA KP312S

Detailed instructions for use are in the User's Guide.

[. . . ] Always change both blades or covers on the drum, otherwise the resulting imbalance will cause vibration and shorten tool life. Always use the correct dust mask/respirator for the material and application you are working with. WARNING: MISUSE or failure to follow the safety rules stated in this instruction manual may cause serious personal injury. DO NOT let comfort or familiarity with product (gained from repeated use) replace strict adherence to planer safety rules. [. . . ] After a cutting operation, raise the back side of the tool and a foot comes under the level of the rear base. Both ends of the front base are a guideline to show the ends of cutting blades passage. Always be sure that the tool is switched off and unplugged before carrying out any work on the tool. Before plugging in the tool, always check to see that the switch trigger actuates properly and returns to the "OFF" position when released. Use gloves or rags to protect your fingers or hands when removing or installing the blades. To remove planer blades on the drum, loosen the eight installation bolts by only one full turn with the hex wrench. Then push and slide a planer blade sideways from the belt side using the helm of the hex wrench. 7 & 8) To install the blades, first clean out all chips or foreign matter adhering to the drum or blades. Insert the blade between the drum and the set plate from the nozzle extraction side so that the blade will be centered from both ends of the drum or set plate. First tighten the eight installation bolts lightly and evenly shifting from the center bolts to the outward bolts with the hex wrench. For continuous operation, pull the trigger and then push in the lock button. To stop the tool from the locked position, pull the trigger fully, then release it. To prevent the trigger from being accidentally pulled, a lock-off button is provided. This tool is equipped with an overload protector which automatically cuts out to break the circuit whenever heavy work is prolonged. After making sure that there is nothing wrong with the tool, push the restart button to resume operation. Your planing surface will end up rough and uneven, unless the blade is set properly and securely. The blade must be mounted so that the cutting edge is absolutely level, that is, parallel to the surface of the rear base. (A) Front base (Movable shoe) (B) Rear base (Stationary shoe) Correct setting Although this side view cannot show it, the edges of the blades run perfectly parallel to the rear base surface. Cause: One or both blade edges fails to protrude enough in relation to rear base line. Cause: One or both blade edges protrudes too far in relation to rear base line. [. . . ] First, rest the tool front base flat upon the workpiece surface without the blades making any contact. Apply pressure on the front of tool at the start of planing, and at the back at the end of planing. The power planer keeps cutting at a speed that will not result in jamming by chips. For rough cutting, the depth of cut can be increased, while for a good finish you should reduce the depth of cut and advance the tool more slowly. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE MAKITA KP312S




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual MAKITA KP312S will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.