User manual MAKITA JR3000

[. . . ] Due to the continuing program of research and development, the specifications herein are subject to change without prior notice. Do not touch the blade or the workpiece immediately after operation; they may be extremely hot and could burn your skin. Important: Always be sure that the machine is switched off and unplugged before installing or removing the blade. [. . . ] Hold the machine by the insulated grasping surfaces to prevent electric shock if you cut through a ``live'' wire. Always switch off and wait for the blade to come to a complete stop before removing the blade from the workpiece. CAUTION: Use the speed change switch only after the machine comes to a complete stop. To change the machine speed, move the speed change switch to the ``L'' position for low speed or the ``H'' position for high speed. CAUTION: Before plugging the machine, always check to see that the switch trigger actuates properly and returns to the ``OFF'' position when released. For machines with lock button To start the machine, simply pull the trigger. For continuous operation, pull the trigger and then push in the lock button. To stop the machine from the locked position, pull the trigger fully, then release it. For machines with lock-off button To prevent the trigger from being accidentally pulled, a lock-off button is provided. Then press the shoe against the workpiece and apply pressure to cut the workpiece. CAUTION: Excessive pressure that causes bending or twisting of the blade may snap it. CAUTION: Before plugging the machine, always check to see that the switch trigger actuates properly and returns to the ``OFF'' position when released. For machines with lock button To start the machine, simply pull the trigger. For continuous operation, pull the trigger and then push in the lock button. To stop the machine from the locked position, pull the trigger fully, then release it. A speed control screw is provided so that maximum machine speed can be limited (variable). [. . . ] Damage attributable to normal wear and tear, overload or improper handling will be excluded from the guarantee. In case of complaint, please send the machine, undismantled, with the enclosed GUARANTEE CERTIFICATE, to your dealer or the Makita Service Center. Vid reklamation skall du sända in hela maskinen, icke isärtagen, tillsammans med det bifogade GARANTIBEVISET (och kvitto/faktura), till din återförsäljare eller till en auktoriserad MAKITA serviceverkstad. [. . . ]