User manual MAKITA HT7510

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual MAKITA HT7510. We hope that this MAKITA HT7510 user guide will be useful to you.


MAKITA HT7510 : Download the complete user guide (1394 Ko)

Manual abstract: user guide MAKITA HT7510

Detailed instructions for use are in the User's Guide.

[. . . ] Avoid body contact with earthed or grounded surfaces such as pipes, radiators, ranges and refrigerators. There is an increased risk of electric shock if your body is earthed or grounded. Never use the cord for carrying, pulling or unplugging the power tool. When operating a power tool outdoors, use an extension cord suitable for outdoor use. [. . . ] Always work in such a way that the extension power cord is behind you. Before checking the cutter, taking care of faults, or removing material caught in the cutter, always switch off the trimmer and unplug the mains plug. Switch off the trimmer and disconnect and secure the mains plug before doing any maintenance work. When moving the hedge trimmer to another location, including during work, always unplug the mains plug. Clean the hedge trimmer and especially the cutter after use, and before putting the trimmer into storage for extended periods. The cover supplied with the unit can be hung on the wall, providing a safe and practical way to store the hedge trimmer. WARNING: MISUSE or failure to follow the safety rules stated in this instruction manual may cause serious personal injury. FUNCTIONAL DESCRIPTION CAUTION: • Always be sure that the tool is switched off and unplugged before adjusting or checking function on the tool. 1) For your safety, this tool is equipped with a triple switching system. The sequence of switching is unimportant as the tool only starts when both switches are activated. 3) Cut upwards with both hands pull the switch triggers B and C and move it in front of your body. 4) To trim the hedge in far area with both hands pull the switch triggers A and C. ASSEMBLY CAUTION: • Always be sure that the tool is switched off and unplugged before carrying out any work on the tool. Engage the extension cord CAUTION: • Make sure that the extension cord is unplugged to the mains outlet. 5) When engaging the extension cord, secure it to the tool’s cord with the hook complete. Waist cord hook CAUTION: • Do not attach the holder of waist cord hook to other than the extension cord. Do not attach it in a position closer to the tool beyond the hook complete. €¢ Attach firmly one hook of the hook complete to the tool’s cord and the other hook of hook complete to the extension cord. Working with the tool with a sole hook only attached may cause an accident and injury. Using the waist cord hook helps to minimizing a risk of cutting off the extension cord unexpectedly caused by the loose extension cord. 7) 9 CAUTION: • Do not force the opening of the holder. Installing or removing chip receiver (accessory) CAUTION: • Always be sure that the tool is switched off and unplugged before installing or removing chip receiver. [. . . ] 25) CAUTION: • Return the gear to the original position in such a manner as it was installed if it should be taken away by mistake. At this time, apply some grease provided with new shear blades to the periphery of the crank. 26) Overlap the oval hole in the upper blade with that in the lower one. 27) Take out the blade cover from the old shear blades and fit it onto the new ones for easy handling during the replacement of blades. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE MAKITA HT7510




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual MAKITA HT7510 will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.