User manual MAKITA HR2460

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual MAKITA HR2460. We hope that this MAKITA HR2460 user guide will be useful to you.


MAKITA HR2460 : Download the complete user guide (586 Ko)

You may also download the following manuals related to this product:

   MAKITA HR2460 (359 ko)
   MAKITA HR2460 (574 ko)
   MAKITA HR2460 (574 ko)
   MAKITA HR2460 (574 ko)
   MAKITA HR2460 (574 ko)
   MAKITA HR2460 (574 ko)
   MAKITA HR2460 (574 ko)
   MAKITA HR2460 DATASHEET (72 ko)
   MAKITA HR2460 PARTS LIST (111 ko)
   MAKITA HR2460 ANNEXE 98 (574 ko)
   MAKITA HR2460 ANNEXE 30 (574 ko)
   MAKITA HR2460 ANNEXE 215 (574 ko)
   MAKITA HR2460 ANNEXE 683 (574 ko)
   MAKITA HR2460 ANNEXE 589 (574 ko)
   MAKITA HR2460 ANNEXE 568 (574 ko)
   MAKITA HR2460 ANNEXE 854 (574 ko)
   MAKITA HR2460 ANNEXE 382 (574 ko)
   MAKITA HR2460 ANNEXE 244 (574 ko)

Manual abstract: user guide MAKITA HR2460

Detailed instructions for use are in the User's Guide.

[. . . ] Do not touch the bit or parts close to the bit immediately after operation; they may be extremely hot and could burn your skin. DO NOT let comfort or familiarity with product (gained from repeated use) replace strict adherence to rotary hammer safety rules. If you use this tool unsafely or incorrectly, you can suffer serious personal injury. [. . . ] Install the side grip so that the teeth on the grip fit in between the protrusions on the tool barrel. Coat the bit shank head beforehand with a small amount of bit grease (about 0. ⷠUse the reversing switch only after the tool comes to a complete stop. Changing the direction of rotation before the tool stops may damage the tool. 7) After installing, always make sure that the bit is securely held in place by trying to pull it out. To remove the bit, pull the chuck cover down all the way and pull the bit out. The depth gauge cannot be used at the position where the depth gauge strikes against the gear housing. Select one of the two modes suitable for your work needs by using this knob. For rotation only, turn the knob so that the arrow on the knob points toward the symbol on the tool body. For rotation with hammering, turn the knob so that the arrow on the knob points toward the symbol on the tool body. cAUTION: · Always set the knob fully to your desired mode symbol. If you operate the tool with the knob positioned halfway between the mode symbols, the tool may be damaged. ⷠUse the knob after the tool comes to a complete stop. Use the dust cup to prevent dust from falling over the tool and on yourself when performing overhead drilling operations. Keep the tool in position and prevent it from slipping away from the hole. Do not apply more pressure when the hole becomes clogged with chips or particles. Instead, run the tool at an idle, then remove the bit partially from the hole. By repeating this several times, the hole will be cleaned out and normal drilling may be resumed. [. . . ] SDS-Plus Carbide-tipped bits Core bit Diamond core bit Drill chuck assembly Drill chuck S13 Chuck adapter Chuck key S13 Bit grease Side grip Depth gauge Blow-out bulb Dust cup Dust extractor attachment Safety goggles Plastic carrying case Keyless drill chuck After drilling the hole, use the blow-out bulb to clean the dust out of the hole. Never use "rotation with hammering" when the drill chuck assembly is installed on the tool. In fact, this excessive pressure will only serve to damage the tip of your bit, decrease the tool performance and shorten the service life of the tool. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE MAKITA HR2460




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual MAKITA HR2460 will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.