User manual MAKITA HR2300X9

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual MAKITA HR2300X9. We hope that this MAKITA HR2300X9 user guide will be useful to you.


MAKITA HR2300X9 : Download the complete user guide (1727 Ko)

Manual abstract: user guide MAKITA HR2300X9

Detailed instructions for use are in the User's Guide.

[. . . ] In cold weather or when the tool has not been used for a long time, let the tool warm up for a while by operating it under no load. Do not touch the bit or parts close to the bit immediately after operation; they may be extremely hot and could burn your skin. 3) CAUTION: • Always check the direction of rotation before operation. € Use the reversing switch only after the tool comes to a complete stop. [. . . ] 16) Press the lock button on the grip base in the direction of arrow shown in the figure and with the lock button being pressed insert the depth gauge into the hex. 17) At this time, the depth gauge needs to be inserted so that its toothed side is directed to the toothed side of hex hole marking on the grip base as shown in Fig. Adjust the depth gauge to the desired depth by moving it back and forth while pressing the lock button. After the adjustment, release the lock button to lock the depth gauge. 19) NOTE: • Inserting the depth gauge with its toothed side not directed to the toothed side of hex hole marking on the grip base as shown in the figure does not allow the depth gauge to be locked. Torque limiter The torque limiter will actuate when a certain torque level is reached. CAUTION: • As soon as the torque limiter actuates, switch off the tool immediately. € Bits such as hole saw, which tend to pinch or catch easily in the hole, are not appropriate for this tool. This is because they will cause the torque limiter to actuate too frequently. 20) Use the dust cup to prevent dust from falling over the tool and on yourself when performing overhead drilling operations. Bit diameter Dust cup 5 Dust cup 9 006406 ASSEMBLY CAUTION: • Always be sure that the tool is switched off and unplugged before carrying out any work on the tool. Install the side grip so that the protrusions on the grip fit in between the grooves on the tool barrel. 5 mm 12 mm – 16 mm There is another type of dust cup (accessory) which helps you prevent dust from falling over the tool and on yourself when performing overhead drilling operations. Bit grease Coat the bit shank head beforehand with a small amount of bit grease (about 0. Installing or removing the dust cup Before installing the dust cup, remove the bit from the tool if installed on the tool. Install the dust cup (accessory) on the tool so that the symbol on the dust cup is aligned with the grooves in the tool. 21) To remove the dust cup, pull the chuck cover in the direction as shown in Fig. 23) NOTE: • When installing or removing the dust cup, the cap may come off the dust cup. Remove the bellows from the attachment and fit the cap from the side shown in the figure with its carved side facing upward so that the groove in the cap fits in the inside periphery of the attachment. 24, 25 & 26) Installing or removing the bit Clean the bit shank and apply bit grease before installing the bit. 12) After installing, always make sure that the bit is securely held in place by trying to pull it out. To remove the bit, hold the ring and turn the sleeve counterclockwise. [. . . ] / Type: HR2610, HR2610T, HR2611F, HR2611FT are of series production and Conforms to the following European Directives: 2006/42/EC And are manufactured in accordance with the following standards or standardised documents: EN60745 The technical documentation is kept by: Makita International Europe Ltd. 2009 • The declared vibration emission value has been measured in accordance with the standard test method and may be used for comparing one tool with another. € The declared vibration emission value may also be used in a preliminary assessment of exposure. WARNING: • The vibration emission during actual use of the power tool can differ from the declared emission value depending on the ways in which the tool is used. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE MAKITA HR2300X9




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual MAKITA HR2300X9 will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.