User manual MAKITA HM0810T

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual MAKITA HM0810T. We hope that this MAKITA HM0810T user guide will be useful to you.


MAKITA HM0810T : Download the complete user guide (1187 Ko)

You may also download the following manuals related to this product:

   MAKITA HM0810T (862 ko)
   MAKITA HM0810T (862 ko)
   MAKITA HM0810T (862 ko)
   MAKITA HM0810T (862 ko)
   MAKITA HM0810T (862 ko)
   MAKITA HM0810T ANNEXE 487 (151 ko)
   MAKITA HM0810T ANNEXE 606 (151 ko)

Manual abstract: user guide MAKITA HM0810T

Detailed instructions for use are in the User's Guide.

[. . . ] Due to our continuing programme of research and development, the specifications herein are subject to change without notice. â· Note: Specifications may differ from country to country. [. . . ] Important: Always be sure that the tool is switched off and unplugged before installing or removing the bit. Pull the change ring down all the way and insert the bit into the tool holder as far as it will go. Release the change ring and it will return automatically to its original position to secure the bit. After installing, always make sure that the bit is securely held in place by trying to pull it out. To remove the bit, pull the change ring down all the way and pull the bit out. CAUTION: Always be sure that the tool is switched off and unplugged before carrying out any work on the tool. Whenever carbon brushes must be replaced, they cut out the tool automatically. This tool requires no hourly or daily lubrication because it has a grease-packed lubrication system. Remove the crank cap using a Makita lock nut wrench (optional accessory). Wipe out the old grease inside and replace with a fresh grease (30 g). To maintain product safety and reliability, repairs, maintenance or adjustment should be carried out by a Makita Authorized Service Centre. The side grip swings around to either side, allowing easy handling of the tool in any position. Loosen the side grip by turning it counterclockwise, swing it to the desired position and then tighten it by turning clockwise. CAUTION: Before plugging in the tool, always check to see that the switch trigger actuates properly and returns to the "OFF" position when released. [. . . ] EC-DECLARATION OF CONFORMITY We declare under our sole responsibility that this product is in compliance with the following standards or standardized documents, HD400, EN50144, EN55014, EN61000 in accordance with Council Directives, 73/23/EEC, 89/336/EEC and 98/37/EC. Measured sound power level: 99 dB Guaranteed sound power level: 105 dB These sound power levels are measured in accordance with Council Directive, 2000/14/EC. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE MAKITA HM0810T




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual MAKITA HM0810T will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.