User manual MAKITA GB801

[. . . ] Do not force the tool or attachment to do a job for which it was not designed. When using an extension cord, be sure to use one heavy enough to carry the current your product will draw. An undersized cord will cause a drop in line voltage resulting in loss of power and overheating. G) of at least 16 is recommended for an extension cord 8 meters or less in length. [. . . ] The safety symbols, and the explanations with them, deserve your careful attention and understanding. The instructions or warning they give are not substitutes for proper accident prevention measures. sYMBOL MEANING SAFETY ALERT SYMBOL: Indicates danger , warning , or caution. DANGER: Failure to obey a safety warning will result in serious injury to yourself to other. Always follow the safety precautions to reduce the risk fire, electric shock and personal injury. WARNING: Failure to obey a safety warning may result in property damage or personal injury to yourself or to others. Always follow the safety precautions to reduce the risk of file, electric shock and personal injury. CAUTION: Failure to obey a safety warning may result in property damage or personal injury to yourself or to others. Always follow the safety precautions to reduce the risk of fire, electric shock and personal injury. WARNING: Do not attempt to operate this tool until you have read thoroughly and understand completely all instructions, safety rules, etc. Failure to comply can result in accidents involving fire, electric shock, or serious personal injury. Save this operator's manual and review frequently for continuing safe operation and instructing others who may use this tool. WARNING: The operation of any grinding can result in foreign objects being thrown into your eyes, which can result in severe eye damage. Before beginning power tool operation, always wear safety goggles or safety glasses with side shields and a full-face shield when needed. We recommend Wide Vision Safety Mask for use over eyeglasses or standard safety glasses with side shields. Lift the bench grinder from the carton and place it on a work surface. Do not discard the packing materials until you have carefully inspected the machine, identified all loose parts, and satisfactorily operated your bench grinder. Examine all parts to make sure no breakage or damage has occurred during shipping. If any parts are damaged or missing, do not attempt to plug in the tool or turn it on until the damaged or missing parts are obtained and installed correctly. Contact your nearest dealer for assistance if parts are missing or damage. WARNING: If any parts are missing do not operate this machine until the missing parts are replaced. Before attempting to use your new tool, familiarize yourself with all operating features and safety requirements. [. . . ] Do not make contact with the grinding wheel until after you have turned on the motor and the wheel is rotating at full speed. Press the dressing tool slightly against the rotating wheel until you get a bite, then move slowly from side across the wheel. 18 When the light bulb is worn out and no longer working, unfasten the screws which fix the lamp cover, then gently remove the bulb from the holder by pushing in and turning anticlockwise. To replace, gently push the light bulb into the insert and turn clockwise, then fix the lamp cover in the revise order. [. . . ]